A Beginner’s Checklist for Converting Files to M4R

Before You Learn M4R Converter: Some Things You Should Know

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

M4R is an audio file extension that was created by Apple to separate regular songs and audio from ringtones

As for methods of converting from your more general file extension formats to M4R, we’ve prepared a whole guide below — where we’ve outlined some of the more important things that you should know about M4R converters and how to use them.

In this article

01 [Why Convert Mp3 to M4R?](#Part 1)

02 [How to Convert Mp3 to M4R?](#Part 2)

03 [How to Convert M4A to M4R?](#Part 3)

Part 1 Why Convert MP3 to M4R?

Let’s start with a bit of an overview of M4R and M4R Converters first! We touched upon this subject in the introduction, but we thought it would be best to expand on the subject here for better understanding. First, let’s talk about what an M4R converter is usually like. Then, let’s talk about why someone might convert from MP3 to M4R.

01M4R Converter Key Features

Here’s a list of some key features that you should look for in an M4R Converter:

● Your average M4R Converter should allow you to convert to M4R from general audio files. That includes the following: MP3, WAV, WMA, AIFF, AMR, FLAC, MKA, WMV, and so much more.

● It should also allow you to ‘extract’ audio from videos (whether it is a MPEG-4, MOV, AVI, etc.)

● The M4R converter would prove even more useful if it allowed you to trim small segments of audio or video (with exact start and end time) so that you can specify which part should play as a ringtone.

● A method of previewing trimmed content prior to conversion would also be helpful so that you won’t have to undergo the process again and again.

● Its settings should also be adjustable or the interface intuitive, allowing you to easily choose or discover the output folder, adjust audio bitrate, and so on.

02Best Three Reasons Why Convert MP3 to M4R

There are several reasons why you might want to use an M4R converter to change from MP3 to M4R, these reasons include:

● Creating iPhone Ringtone: The main purpose of converting to M4R is, of course, to create iPhone ringtones. This file extension was created by Apple specifically to differentiate between songs and ringtones. And, if you’re a regular iOS user but are not a fan of the basic iOS ringtones, learning how to create M4R files would be beneficial in opening your horizons.

● Transfer Ringtones to iPhone: Of course, once the M4R is created for use, it would need to be transferred. This is much easier if it stays in this format!

● Making General M4R Audio: Although not as common, some users see the benefit of using M4R audio for other reasons (i.e., content creators sometimes use M4R audio as a sound-effect for videos). Thus, knowing how to convert from MP3 to MP4 usually proves to be useful for them.

Part 2 How to Convert Mp3 to M4R?

Now, let’s start with a more in-depth tutorial on how to actually convert MP3 to M4R! In this case, specifically, we’ll be providing three different examples. Starting with an online solution and then following it up with the general iTunes conversion and the more involved software conversion!

01How to Convert MP3 to M4R Online?

As mentioned, the first M4R Converter on this list is an online one! There are plenty of these kinds of online converter tools available, and they all pretty much work the same way, so the example we’ll be showing below is more of an all-purpose kind of affair. However, just in case you’re curious, the tool we’ll be using for our examples is the Converter from Audio Tool Set!

**Step 1: Visit Online Converter Website!

First! Open the M4R Converter online tool that you want to use! If you want to follow along with our examples, a URL has been provided for you below:

**Step 2: Upload MP3 File

Next, it’s time to upload the MP3 file that you want to convert to M4R!

Usually, all you have to do for this is click the ‘Upload’ button or drag-and-drop the file onto the specified area. But, in some cases, the M4R converter may also allow you to upload via a link or from cloud-based storage (i.e., Dropbox.)

**Step 3: Select M4R as Output Format!

Once your MP3 file has been uploaded, select the format that you want it to be converted into. This may have defaulted to M4R or you may be given the chance to choose yourself (as is shown in the image below.)

**Step 4: Select Convert!

The next thing you need to do is to simply select the ‘CONVERT’ option to begin processing the change from MP3 to M4R!

**Step 5: Download Converter M4R!

Once the conversion is done, you should now have been given the option to download the finished M4R. Click ‘DOWNLOAD’ and you’re done!

012. How to convert MP3 to M4R on iTunes?

Of course, as an Apple File Extension, it only makes sense that Apple provides its users an easy way to convert general audio to M4R! In this case, we’ll be showing you another method to convert from MP3 to M4R with Apple’s own iTunes! Of course, if you want to follow along with this next example, you’ll have to download and install the software (for Windows users) before proceeding.

**Step 1: Add File or Folder to Library!

Once you have iTunes installed, launch the program and go to ‘File’ > ‘Add File to Library’ or ‘Add Folder to Library’ to upload the MP3 file(s) that you want to convert to M4R!

**Step 2: Select MP3 and Adjust Timing!

Since M4R ringtones are limited to 40 seconds only, you’ll need to adjust timing prior to conversion if you want the ringtone to start and end at a specific time.

This is possible to do by selecting the song from your library and right clicking so you can access the ‘OPTIONS’ tab (shown below)! Under the Options tab, you’ll be able to specify the start and stop time for your chosen MP3!

Click ‘OK’ when done in order to save any changes!

**Step 3: Convert to Version!

Next, with the MP3 file still selected, go to the ‘FILE’ tab (shown in the image below) and then click ‘CONVERT’ > ‘Create Version’!

**Step 4: Go to the Destination Folder!

After the conversion has been finished, locate the file’s destination folder. You’ll notice that the file extension of the file is .M4A but this is easy enough to change.

Just rename the file extension to .M4R (example shown below) and click ‘YES’ to confirm the change! In this way, you’ve managed to convert MP3 to M4R with iTunes!

013. How to Convert MP3 to M4R Online Free with Ringtone Maker?

For this last example of converting MP3 to M4R, we’ve decided to show-off the ringtone maker, Wondershare TunesGo! This program is, of course, more than just a ringtone maker, but the function that we’ll be exploring will be the process of making an iPhone Ringtone from an MP3 file to an M4R (start to finish!)

**Step 1: Launch Program and Connect iPhone to Computer!

First, launch the M4R converter software on your desktop and connect your iPhone to your computer! If you want to use the program that we’re showing off in this example, the URL has been provided below:

**Step 2: Select Ringtone Maker

Once the program has been launched, go to the ‘MUSIC’ tab and select “Ringtone Maker” (pointed out in the image below.)

**Step 3: Select Music File!

A secondary window should appear after you select the ‘Ringtone Maker’ option. Here, the first thing you have to do is upload the music file that you want to convert.

For the software that we’re using as an example, you can choose to upload ‘Local Music’ from your computer or ‘Device Music’ from the music that you have stored in your connected iPhone. We’ll be explaining the different methods to select a music file in the three following steps!

**Step 4: Local Upload - Open!

If you select ‘Local Music’ a system window will appear asking you to select the music file that you want to convert to M4R. Do so and click ‘OPEN!’

**Step 5: Device Music - SELECT!

For the ‘Device Music’ option, another program window will appear. This time, with all the music on your device. You can select the music file you want to convert from here! Click ‘Select’ when done!

**Step 6: TunesGo Library!

For the last method of selecting a music file, all you have to do is select a file from the ‘MUSIC’ tab of TunesGo, right-click on said file, and then select ‘Ringtone Maker’ on the pop-up that appears (shown below).

**Step 7: Trim and Save!

Once you’ve chosen the music file you want to convert, you can now:

● Trim the file to specify which part of the file you want to convert (40 seconds only for a proper Ringtone!)

● Use the ‘Ringtone Audition’ option to preview your trimmed audio.

● And, finally, you can save the finished ringtone directly to your PC or Device!

In this way, not only have you managed to convert from MP3 to M4R cleanly, but you can also use it right away on either your PC or iPhone!

Part 3 How to Convert M4A to M4R?

Another Apple extension file that you might recognize is M4A! This was mentioned briefly in a previous tutorial, but it might be more familiar to others as ‘compressed’ Apple Music. This is what your audio becomes when processed through iTunes. It’s also known as MPEG-4 Audio, and its main purpose is to compress the size of an audio file (compared to MP3) without compromising the quality.

01How to convert M4A to M4R on Windows?

This process was mentioned briefly in Part 2, Section 3 of this article, but we’ll be going through the easiest method of converting M4A to M4R on Windows below! This method is possible only because the formats are pretty much the same. The only difference lies in how they are categorized.

**Step 1: View File Extensions!

The first step to convert M4A to M4R is to open the folder in which your M4A audio is stored. There, make sure that you have ‘File Name Extensions’ selected under the ‘VIEW’ tab (pointed out in the image below).

This will allow you to view and edit the file extension of a given file.

**Step 2: Rename M4A to M4R!

Next, select the M4A that you want to convert and right-click so that you can choose the ‘Rename’ option on the pop-up that appears.

**Step 3: Change M4A to M4R

With ‘File Name Extensions’ on, you can edit the file extension as well! Of course, this is not possible for all conversions. But, as mentioned, since M4A and M4R files are pretty much the same, you can do so without damaging the file!

Meaning, you can change M4A to M4R without worrying about it being unusable!

012. How to Convert M4A to M4R with iTunes

This process was already explained in Part 2, Section 2 of this article. But, since it’s important to provide this perspective we’ll be going through the process again. This time, with the intention of converting an M4A music file to an M4R!

**Step 1: Add File to iTunes Library!

First, add the M4A file to your iTunes library! (You can use the drag-and-drop feature or select ‘Add File’ or ‘Add folder’ under the ‘FILE’ tab).

**Step 2: Create to M4R!

Once your M4A audio file has been uploaded, make sure that it’s selected and then select ‘Create Version’ for it (the option can be found under the ‘FILE’ tab > ‘Convert’!)

**Step 3: Convert M4A to M4R

Once the version of the file has been created (which comes out as M4A), you can use the method we showed in Section 3, Part 1 of this article to change the M4A to M4R simply by rewriting the file extension name.

03How to Convert M4A to M4R Online

For this next part, we’ll be echoing another one of our earlier tutorials! Only, this time, we’ll be focusing on converting M4A to M4R online with an M4R converter online! Specifically, the one we introduced previously — Audio Tool Set!

**Step 1: Online M4R Converter

Audio Tool Set offers an M4A to M4R converter that you can select under the ‘CONVERT AUDIO’ tab!

**Step 2: Upload M4A File!

Once you’ve been moved to the free M4A to M4R converter, select the ‘UPLOAD M4A’ option to browse your PC for the M4A file that you want to convert.

**Step 3: Confirm M4R Conversion Format!

If you’re using the M4A to M4R Converter you can skip this step. But, if not, make sure that you have chosen ‘M4R’ as your desired conversion format!

**Step 4: Convert M4A to M4R!

With all of that in order, select ‘CONVERT’ to move forward.

**Step 5: Download Converted M4R!

Finally, with the conversion done, you can now download the converted file to use as you will! This can be done by selecting the ‘DOWNLOAD’ option!

04How to Create and How to Open an M4A File?

If you want detailed instructions on how to create an M4A file, please refer to Part 2, Section 2 of this article, or Part 3, Section 2. In both sections, we demonstrated how one can create an M4A file by using the ‘Create Version’ feature that iTunes offers.

In that same vein, if you want to be able to open an M4A file, iTunes is your best bet! Although, it should also be said that some of the more advanced media players (and audio players), like QuickTime or Media Player, can open M4A files as well!

05Which Other Formats M4A Can Be Converted into and Why?

There are numerous file formats that you can convert M4A into. If you want examples: you can convert M4A to M4R, MP3 to M4A, WAV to M4A, FLAC to M4A, OGG to M4A, WMA to M4A, and so much more! Of course, if you want more advanced M4A conversions, you might want to consider using a more advanced tool. One such M4A converter that we recommend is Filmora Pro!

Wondershare Filmora Video Editor is an all-in-one video editing software that will allow you to convert M4A to M4R (and all sorts of other audio and video file formats) so that you can make use of the file for all your projects! The best part of using a video editor like Filmora, of course, is that once you’ve converted the file, you can use it immediately — there’s no need to wait, you can finish your project right then and there, making it unnecessary for you to go searching for any other solution.

Wondershare Filmora - Best Video Editor for Mac/Windows

Try It Free Try It Free

5,481,435 people have downloaded it.

Build unique custom animations without breaking a sweat.

Focus on creating epic stories and leave the details to Filmora’s auto features.

Start a creative adventure with drag & drop effects and endless possibilities.

Filmora simplifies advanced features to save you time and effort.

Filmora cuts out repetition so you can move on to your next creative breakthrough.

Key Takeaways from This Episode

● What’s the point of M4R Converters? Well, it’s most relevant to iOS users! Especially those who are tired of listening to the same boring tones on their phone over and over again!

● The M4R file format was created by Apple to differentiate music from ringtones. And, by becoming familiar with the process (which we’ve illustrated in many details in the article above), you can flex your creativity a bit and control just what tones are coming out of your phone!

● It’s not all that difficult to create M4Rs either! There are several methods that you can try — online, iTunes, third-party software, and so much more!

● And, you can make these ringtones from pretty much any format — whether you’re converting from MP3, MOV, WAV, FLAC, WMA, etc.

Try It Free Try It Free

M4R is an audio file extension that was created by Apple to separate regular songs and audio from ringtones

As for methods of converting from your more general file extension formats to M4R, we’ve prepared a whole guide below — where we’ve outlined some of the more important things that you should know about M4R converters and how to use them.

In this article

01 [Why Convert Mp3 to M4R?](#Part 1)

02 [How to Convert Mp3 to M4R?](#Part 2)

03 [How to Convert M4A to M4R?](#Part 3)

Part 1 Why Convert MP3 to M4R?

Let’s start with a bit of an overview of M4R and M4R Converters first! We touched upon this subject in the introduction, but we thought it would be best to expand on the subject here for better understanding. First, let’s talk about what an M4R converter is usually like. Then, let’s talk about why someone might convert from MP3 to M4R.

01M4R Converter Key Features

Here’s a list of some key features that you should look for in an M4R Converter:

● Your average M4R Converter should allow you to convert to M4R from general audio files. That includes the following: MP3, WAV, WMA, AIFF, AMR, FLAC, MKA, WMV, and so much more.

● It should also allow you to ‘extract’ audio from videos (whether it is a MPEG-4, MOV, AVI, etc.)

● The M4R converter would prove even more useful if it allowed you to trim small segments of audio or video (with exact start and end time) so that you can specify which part should play as a ringtone.

● A method of previewing trimmed content prior to conversion would also be helpful so that you won’t have to undergo the process again and again.

● Its settings should also be adjustable or the interface intuitive, allowing you to easily choose or discover the output folder, adjust audio bitrate, and so on.

02Best Three Reasons Why Convert MP3 to M4R

There are several reasons why you might want to use an M4R converter to change from MP3 to M4R, these reasons include:

● Creating iPhone Ringtone: The main purpose of converting to M4R is, of course, to create iPhone ringtones. This file extension was created by Apple specifically to differentiate between songs and ringtones. And, if you’re a regular iOS user but are not a fan of the basic iOS ringtones, learning how to create M4R files would be beneficial in opening your horizons.

● Transfer Ringtones to iPhone: Of course, once the M4R is created for use, it would need to be transferred. This is much easier if it stays in this format!

● Making General M4R Audio: Although not as common, some users see the benefit of using M4R audio for other reasons (i.e., content creators sometimes use M4R audio as a sound-effect for videos). Thus, knowing how to convert from MP3 to MP4 usually proves to be useful for them.

Part 2 How to Convert Mp3 to M4R?

Now, let’s start with a more in-depth tutorial on how to actually convert MP3 to M4R! In this case, specifically, we’ll be providing three different examples. Starting with an online solution and then following it up with the general iTunes conversion and the more involved software conversion!

01How to Convert MP3 to M4R Online?

As mentioned, the first M4R Converter on this list is an online one! There are plenty of these kinds of online converter tools available, and they all pretty much work the same way, so the example we’ll be showing below is more of an all-purpose kind of affair. However, just in case you’re curious, the tool we’ll be using for our examples is the Converter from Audio Tool Set!

**Step 1: Visit Online Converter Website!

First! Open the M4R Converter online tool that you want to use! If you want to follow along with our examples, a URL has been provided for you below:

**Step 2: Upload MP3 File

Next, it’s time to upload the MP3 file that you want to convert to M4R!

Usually, all you have to do for this is click the ‘Upload’ button or drag-and-drop the file onto the specified area. But, in some cases, the M4R converter may also allow you to upload via a link or from cloud-based storage (i.e., Dropbox.)

**Step 3: Select M4R as Output Format!

Once your MP3 file has been uploaded, select the format that you want it to be converted into. This may have defaulted to M4R or you may be given the chance to choose yourself (as is shown in the image below.)

**Step 4: Select Convert!

The next thing you need to do is to simply select the ‘CONVERT’ option to begin processing the change from MP3 to M4R!

**Step 5: Download Converter M4R!

Once the conversion is done, you should now have been given the option to download the finished M4R. Click ‘DOWNLOAD’ and you’re done!

012. How to convert MP3 to M4R on iTunes?

Of course, as an Apple File Extension, it only makes sense that Apple provides its users an easy way to convert general audio to M4R! In this case, we’ll be showing you another method to convert from MP3 to M4R with Apple’s own iTunes! Of course, if you want to follow along with this next example, you’ll have to download and install the software (for Windows users) before proceeding.

**Step 1: Add File or Folder to Library!

Once you have iTunes installed, launch the program and go to ‘File’ > ‘Add File to Library’ or ‘Add Folder to Library’ to upload the MP3 file(s) that you want to convert to M4R!

**Step 2: Select MP3 and Adjust Timing!

Since M4R ringtones are limited to 40 seconds only, you’ll need to adjust timing prior to conversion if you want the ringtone to start and end at a specific time.

This is possible to do by selecting the song from your library and right clicking so you can access the ‘OPTIONS’ tab (shown below)! Under the Options tab, you’ll be able to specify the start and stop time for your chosen MP3!

Click ‘OK’ when done in order to save any changes!

**Step 3: Convert to Version!

Next, with the MP3 file still selected, go to the ‘FILE’ tab (shown in the image below) and then click ‘CONVERT’ > ‘Create Version’!

**Step 4: Go to the Destination Folder!

After the conversion has been finished, locate the file’s destination folder. You’ll notice that the file extension of the file is .M4A but this is easy enough to change.

Just rename the file extension to .M4R (example shown below) and click ‘YES’ to confirm the change! In this way, you’ve managed to convert MP3 to M4R with iTunes!

013. How to Convert MP3 to M4R Online Free with Ringtone Maker?

For this last example of converting MP3 to M4R, we’ve decided to show-off the ringtone maker, Wondershare TunesGo! This program is, of course, more than just a ringtone maker, but the function that we’ll be exploring will be the process of making an iPhone Ringtone from an MP3 file to an M4R (start to finish!)

**Step 1: Launch Program and Connect iPhone to Computer!

First, launch the M4R converter software on your desktop and connect your iPhone to your computer! If you want to use the program that we’re showing off in this example, the URL has been provided below:

**Step 2: Select Ringtone Maker

Once the program has been launched, go to the ‘MUSIC’ tab and select “Ringtone Maker” (pointed out in the image below.)

**Step 3: Select Music File!

A secondary window should appear after you select the ‘Ringtone Maker’ option. Here, the first thing you have to do is upload the music file that you want to convert.

For the software that we’re using as an example, you can choose to upload ‘Local Music’ from your computer or ‘Device Music’ from the music that you have stored in your connected iPhone. We’ll be explaining the different methods to select a music file in the three following steps!

**Step 4: Local Upload - Open!

If you select ‘Local Music’ a system window will appear asking you to select the music file that you want to convert to M4R. Do so and click ‘OPEN!’

**Step 5: Device Music - SELECT!

For the ‘Device Music’ option, another program window will appear. This time, with all the music on your device. You can select the music file you want to convert from here! Click ‘Select’ when done!

**Step 6: TunesGo Library!

For the last method of selecting a music file, all you have to do is select a file from the ‘MUSIC’ tab of TunesGo, right-click on said file, and then select ‘Ringtone Maker’ on the pop-up that appears (shown below).

**Step 7: Trim and Save!

Once you’ve chosen the music file you want to convert, you can now:

● Trim the file to specify which part of the file you want to convert (40 seconds only for a proper Ringtone!)

● Use the ‘Ringtone Audition’ option to preview your trimmed audio.

● And, finally, you can save the finished ringtone directly to your PC or Device!

In this way, not only have you managed to convert from MP3 to M4R cleanly, but you can also use it right away on either your PC or iPhone!

Part 3 How to Convert M4A to M4R?

Another Apple extension file that you might recognize is M4A! This was mentioned briefly in a previous tutorial, but it might be more familiar to others as ‘compressed’ Apple Music. This is what your audio becomes when processed through iTunes. It’s also known as MPEG-4 Audio, and its main purpose is to compress the size of an audio file (compared to MP3) without compromising the quality.

01How to convert M4A to M4R on Windows?

This process was mentioned briefly in Part 2, Section 3 of this article, but we’ll be going through the easiest method of converting M4A to M4R on Windows below! This method is possible only because the formats are pretty much the same. The only difference lies in how they are categorized.

**Step 1: View File Extensions!

The first step to convert M4A to M4R is to open the folder in which your M4A audio is stored. There, make sure that you have ‘File Name Extensions’ selected under the ‘VIEW’ tab (pointed out in the image below).

This will allow you to view and edit the file extension of a given file.

**Step 2: Rename M4A to M4R!

Next, select the M4A that you want to convert and right-click so that you can choose the ‘Rename’ option on the pop-up that appears.

**Step 3: Change M4A to M4R

With ‘File Name Extensions’ on, you can edit the file extension as well! Of course, this is not possible for all conversions. But, as mentioned, since M4A and M4R files are pretty much the same, you can do so without damaging the file!

Meaning, you can change M4A to M4R without worrying about it being unusable!

012. How to Convert M4A to M4R with iTunes

This process was already explained in Part 2, Section 2 of this article. But, since it’s important to provide this perspective we’ll be going through the process again. This time, with the intention of converting an M4A music file to an M4R!

**Step 1: Add File to iTunes Library!

First, add the M4A file to your iTunes library! (You can use the drag-and-drop feature or select ‘Add File’ or ‘Add folder’ under the ‘FILE’ tab).

**Step 2: Create to M4R!

Once your M4A audio file has been uploaded, make sure that it’s selected and then select ‘Create Version’ for it (the option can be found under the ‘FILE’ tab > ‘Convert’!)

**Step 3: Convert M4A to M4R

Once the version of the file has been created (which comes out as M4A), you can use the method we showed in Section 3, Part 1 of this article to change the M4A to M4R simply by rewriting the file extension name.

03How to Convert M4A to M4R Online

For this next part, we’ll be echoing another one of our earlier tutorials! Only, this time, we’ll be focusing on converting M4A to M4R online with an M4R converter online! Specifically, the one we introduced previously — Audio Tool Set!

**Step 1: Online M4R Converter

Audio Tool Set offers an M4A to M4R converter that you can select under the ‘CONVERT AUDIO’ tab!

**Step 2: Upload M4A File!

Once you’ve been moved to the free M4A to M4R converter, select the ‘UPLOAD M4A’ option to browse your PC for the M4A file that you want to convert.

**Step 3: Confirm M4R Conversion Format!

If you’re using the M4A to M4R Converter you can skip this step. But, if not, make sure that you have chosen ‘M4R’ as your desired conversion format!

**Step 4: Convert M4A to M4R!

With all of that in order, select ‘CONVERT’ to move forward.

**Step 5: Download Converted M4R!

Finally, with the conversion done, you can now download the converted file to use as you will! This can be done by selecting the ‘DOWNLOAD’ option!

04How to Create and How to Open an M4A File?

If you want detailed instructions on how to create an M4A file, please refer to Part 2, Section 2 of this article, or Part 3, Section 2. In both sections, we demonstrated how one can create an M4A file by using the ‘Create Version’ feature that iTunes offers.

In that same vein, if you want to be able to open an M4A file, iTunes is your best bet! Although, it should also be said that some of the more advanced media players (and audio players), like QuickTime or Media Player, can open M4A files as well!

05Which Other Formats M4A Can Be Converted into and Why?

There are numerous file formats that you can convert M4A into. If you want examples: you can convert M4A to M4R, MP3 to M4A, WAV to M4A, FLAC to M4A, OGG to M4A, WMA to M4A, and so much more! Of course, if you want more advanced M4A conversions, you might want to consider using a more advanced tool. One such M4A converter that we recommend is Filmora Pro!

Wondershare Filmora Video Editor is an all-in-one video editing software that will allow you to convert M4A to M4R (and all sorts of other audio and video file formats) so that you can make use of the file for all your projects! The best part of using a video editor like Filmora, of course, is that once you’ve converted the file, you can use it immediately — there’s no need to wait, you can finish your project right then and there, making it unnecessary for you to go searching for any other solution.

Wondershare Filmora - Best Video Editor for Mac/Windows

Try It Free Try It Free

5,481,435 people have downloaded it.

Build unique custom animations without breaking a sweat.

Focus on creating epic stories and leave the details to Filmora’s auto features.

Start a creative adventure with drag & drop effects and endless possibilities.

Filmora simplifies advanced features to save you time and effort.

Filmora cuts out repetition so you can move on to your next creative breakthrough.

Key Takeaways from This Episode

● What’s the point of M4R Converters? Well, it’s most relevant to iOS users! Especially those who are tired of listening to the same boring tones on their phone over and over again!

● The M4R file format was created by Apple to differentiate music from ringtones. And, by becoming familiar with the process (which we’ve illustrated in many details in the article above), you can flex your creativity a bit and control just what tones are coming out of your phone!

● It’s not all that difficult to create M4Rs either! There are several methods that you can try — online, iTunes, third-party software, and so much more!

● And, you can make these ringtones from pretty much any format — whether you’re converting from MP3, MOV, WAV, FLAC, WMA, etc.

Try It Free Try It Free

M4R is an audio file extension that was created by Apple to separate regular songs and audio from ringtones

As for methods of converting from your more general file extension formats to M4R, we’ve prepared a whole guide below — where we’ve outlined some of the more important things that you should know about M4R converters and how to use them.

In this article

01 [Why Convert Mp3 to M4R?](#Part 1)

02 [How to Convert Mp3 to M4R?](#Part 2)

03 [How to Convert M4A to M4R?](#Part 3)

Part 1 Why Convert MP3 to M4R?

Let’s start with a bit of an overview of M4R and M4R Converters first! We touched upon this subject in the introduction, but we thought it would be best to expand on the subject here for better understanding. First, let’s talk about what an M4R converter is usually like. Then, let’s talk about why someone might convert from MP3 to M4R.

01M4R Converter Key Features

Here’s a list of some key features that you should look for in an M4R Converter:

● Your average M4R Converter should allow you to convert to M4R from general audio files. That includes the following: MP3, WAV, WMA, AIFF, AMR, FLAC, MKA, WMV, and so much more.

● It should also allow you to ‘extract’ audio from videos (whether it is a MPEG-4, MOV, AVI, etc.)

● The M4R converter would prove even more useful if it allowed you to trim small segments of audio or video (with exact start and end time) so that you can specify which part should play as a ringtone.

● A method of previewing trimmed content prior to conversion would also be helpful so that you won’t have to undergo the process again and again.

● Its settings should also be adjustable or the interface intuitive, allowing you to easily choose or discover the output folder, adjust audio bitrate, and so on.

02Best Three Reasons Why Convert MP3 to M4R

There are several reasons why you might want to use an M4R converter to change from MP3 to M4R, these reasons include:

● Creating iPhone Ringtone: The main purpose of converting to M4R is, of course, to create iPhone ringtones. This file extension was created by Apple specifically to differentiate between songs and ringtones. And, if you’re a regular iOS user but are not a fan of the basic iOS ringtones, learning how to create M4R files would be beneficial in opening your horizons.

● Transfer Ringtones to iPhone: Of course, once the M4R is created for use, it would need to be transferred. This is much easier if it stays in this format!

● Making General M4R Audio: Although not as common, some users see the benefit of using M4R audio for other reasons (i.e., content creators sometimes use M4R audio as a sound-effect for videos). Thus, knowing how to convert from MP3 to MP4 usually proves to be useful for them.

Part 2 How to Convert Mp3 to M4R?

Now, let’s start with a more in-depth tutorial on how to actually convert MP3 to M4R! In this case, specifically, we’ll be providing three different examples. Starting with an online solution and then following it up with the general iTunes conversion and the more involved software conversion!

01How to Convert MP3 to M4R Online?

As mentioned, the first M4R Converter on this list is an online one! There are plenty of these kinds of online converter tools available, and they all pretty much work the same way, so the example we’ll be showing below is more of an all-purpose kind of affair. However, just in case you’re curious, the tool we’ll be using for our examples is the Converter from Audio Tool Set!

**Step 1: Visit Online Converter Website!

First! Open the M4R Converter online tool that you want to use! If you want to follow along with our examples, a URL has been provided for you below:

**Step 2: Upload MP3 File

Next, it’s time to upload the MP3 file that you want to convert to M4R!

Usually, all you have to do for this is click the ‘Upload’ button or drag-and-drop the file onto the specified area. But, in some cases, the M4R converter may also allow you to upload via a link or from cloud-based storage (i.e., Dropbox.)

**Step 3: Select M4R as Output Format!

Once your MP3 file has been uploaded, select the format that you want it to be converted into. This may have defaulted to M4R or you may be given the chance to choose yourself (as is shown in the image below.)

**Step 4: Select Convert!

The next thing you need to do is to simply select the ‘CONVERT’ option to begin processing the change from MP3 to M4R!

**Step 5: Download Converter M4R!

Once the conversion is done, you should now have been given the option to download the finished M4R. Click ‘DOWNLOAD’ and you’re done!

012. How to convert MP3 to M4R on iTunes?

Of course, as an Apple File Extension, it only makes sense that Apple provides its users an easy way to convert general audio to M4R! In this case, we’ll be showing you another method to convert from MP3 to M4R with Apple’s own iTunes! Of course, if you want to follow along with this next example, you’ll have to download and install the software (for Windows users) before proceeding.

**Step 1: Add File or Folder to Library!

Once you have iTunes installed, launch the program and go to ‘File’ > ‘Add File to Library’ or ‘Add Folder to Library’ to upload the MP3 file(s) that you want to convert to M4R!

**Step 2: Select MP3 and Adjust Timing!

Since M4R ringtones are limited to 40 seconds only, you’ll need to adjust timing prior to conversion if you want the ringtone to start and end at a specific time.

This is possible to do by selecting the song from your library and right clicking so you can access the ‘OPTIONS’ tab (shown below)! Under the Options tab, you’ll be able to specify the start and stop time for your chosen MP3!

Click ‘OK’ when done in order to save any changes!

**Step 3: Convert to Version!

Next, with the MP3 file still selected, go to the ‘FILE’ tab (shown in the image below) and then click ‘CONVERT’ > ‘Create Version’!

**Step 4: Go to the Destination Folder!

After the conversion has been finished, locate the file’s destination folder. You’ll notice that the file extension of the file is .M4A but this is easy enough to change.

Just rename the file extension to .M4R (example shown below) and click ‘YES’ to confirm the change! In this way, you’ve managed to convert MP3 to M4R with iTunes!

013. How to Convert MP3 to M4R Online Free with Ringtone Maker?

For this last example of converting MP3 to M4R, we’ve decided to show-off the ringtone maker, Wondershare TunesGo! This program is, of course, more than just a ringtone maker, but the function that we’ll be exploring will be the process of making an iPhone Ringtone from an MP3 file to an M4R (start to finish!)

**Step 1: Launch Program and Connect iPhone to Computer!

First, launch the M4R converter software on your desktop and connect your iPhone to your computer! If you want to use the program that we’re showing off in this example, the URL has been provided below:

**Step 2: Select Ringtone Maker

Once the program has been launched, go to the ‘MUSIC’ tab and select “Ringtone Maker” (pointed out in the image below.)

**Step 3: Select Music File!

A secondary window should appear after you select the ‘Ringtone Maker’ option. Here, the first thing you have to do is upload the music file that you want to convert.

For the software that we’re using as an example, you can choose to upload ‘Local Music’ from your computer or ‘Device Music’ from the music that you have stored in your connected iPhone. We’ll be explaining the different methods to select a music file in the three following steps!

**Step 4: Local Upload - Open!

If you select ‘Local Music’ a system window will appear asking you to select the music file that you want to convert to M4R. Do so and click ‘OPEN!’

**Step 5: Device Music - SELECT!

For the ‘Device Music’ option, another program window will appear. This time, with all the music on your device. You can select the music file you want to convert from here! Click ‘Select’ when done!

**Step 6: TunesGo Library!

For the last method of selecting a music file, all you have to do is select a file from the ‘MUSIC’ tab of TunesGo, right-click on said file, and then select ‘Ringtone Maker’ on the pop-up that appears (shown below).

**Step 7: Trim and Save!

Once you’ve chosen the music file you want to convert, you can now:

● Trim the file to specify which part of the file you want to convert (40 seconds only for a proper Ringtone!)

● Use the ‘Ringtone Audition’ option to preview your trimmed audio.

● And, finally, you can save the finished ringtone directly to your PC or Device!

In this way, not only have you managed to convert from MP3 to M4R cleanly, but you can also use it right away on either your PC or iPhone!

Part 3 How to Convert M4A to M4R?

Another Apple extension file that you might recognize is M4A! This was mentioned briefly in a previous tutorial, but it might be more familiar to others as ‘compressed’ Apple Music. This is what your audio becomes when processed through iTunes. It’s also known as MPEG-4 Audio, and its main purpose is to compress the size of an audio file (compared to MP3) without compromising the quality.

01How to convert M4A to M4R on Windows?

This process was mentioned briefly in Part 2, Section 3 of this article, but we’ll be going through the easiest method of converting M4A to M4R on Windows below! This method is possible only because the formats are pretty much the same. The only difference lies in how they are categorized.

**Step 1: View File Extensions!

The first step to convert M4A to M4R is to open the folder in which your M4A audio is stored. There, make sure that you have ‘File Name Extensions’ selected under the ‘VIEW’ tab (pointed out in the image below).

This will allow you to view and edit the file extension of a given file.

**Step 2: Rename M4A to M4R!

Next, select the M4A that you want to convert and right-click so that you can choose the ‘Rename’ option on the pop-up that appears.

**Step 3: Change M4A to M4R

With ‘File Name Extensions’ on, you can edit the file extension as well! Of course, this is not possible for all conversions. But, as mentioned, since M4A and M4R files are pretty much the same, you can do so without damaging the file!

Meaning, you can change M4A to M4R without worrying about it being unusable!

012. How to Convert M4A to M4R with iTunes

This process was already explained in Part 2, Section 2 of this article. But, since it’s important to provide this perspective we’ll be going through the process again. This time, with the intention of converting an M4A music file to an M4R!

**Step 1: Add File to iTunes Library!

First, add the M4A file to your iTunes library! (You can use the drag-and-drop feature or select ‘Add File’ or ‘Add folder’ under the ‘FILE’ tab).

**Step 2: Create to M4R!

Once your M4A audio file has been uploaded, make sure that it’s selected and then select ‘Create Version’ for it (the option can be found under the ‘FILE’ tab > ‘Convert’!)

**Step 3: Convert M4A to M4R

Once the version of the file has been created (which comes out as M4A), you can use the method we showed in Section 3, Part 1 of this article to change the M4A to M4R simply by rewriting the file extension name.

03How to Convert M4A to M4R Online

For this next part, we’ll be echoing another one of our earlier tutorials! Only, this time, we’ll be focusing on converting M4A to M4R online with an M4R converter online! Specifically, the one we introduced previously — Audio Tool Set!

**Step 1: Online M4R Converter

Audio Tool Set offers an M4A to M4R converter that you can select under the ‘CONVERT AUDIO’ tab!

**Step 2: Upload M4A File!

Once you’ve been moved to the free M4A to M4R converter, select the ‘UPLOAD M4A’ option to browse your PC for the M4A file that you want to convert.

**Step 3: Confirm M4R Conversion Format!

If you’re using the M4A to M4R Converter you can skip this step. But, if not, make sure that you have chosen ‘M4R’ as your desired conversion format!

**Step 4: Convert M4A to M4R!

With all of that in order, select ‘CONVERT’ to move forward.

**Step 5: Download Converted M4R!

Finally, with the conversion done, you can now download the converted file to use as you will! This can be done by selecting the ‘DOWNLOAD’ option!

04How to Create and How to Open an M4A File?

If you want detailed instructions on how to create an M4A file, please refer to Part 2, Section 2 of this article, or Part 3, Section 2. In both sections, we demonstrated how one can create an M4A file by using the ‘Create Version’ feature that iTunes offers.

In that same vein, if you want to be able to open an M4A file, iTunes is your best bet! Although, it should also be said that some of the more advanced media players (and audio players), like QuickTime or Media Player, can open M4A files as well!

05Which Other Formats M4A Can Be Converted into and Why?

There are numerous file formats that you can convert M4A into. If you want examples: you can convert M4A to M4R, MP3 to M4A, WAV to M4A, FLAC to M4A, OGG to M4A, WMA to M4A, and so much more! Of course, if you want more advanced M4A conversions, you might want to consider using a more advanced tool. One such M4A converter that we recommend is Filmora Pro!

Wondershare Filmora Video Editor is an all-in-one video editing software that will allow you to convert M4A to M4R (and all sorts of other audio and video file formats) so that you can make use of the file for all your projects! The best part of using a video editor like Filmora, of course, is that once you’ve converted the file, you can use it immediately — there’s no need to wait, you can finish your project right then and there, making it unnecessary for you to go searching for any other solution.

Wondershare Filmora - Best Video Editor for Mac/Windows

Try It Free Try It Free

5,481,435 people have downloaded it.

Build unique custom animations without breaking a sweat.

Focus on creating epic stories and leave the details to Filmora’s auto features.

Start a creative adventure with drag & drop effects and endless possibilities.

Filmora simplifies advanced features to save you time and effort.

Filmora cuts out repetition so you can move on to your next creative breakthrough.

Key Takeaways from This Episode

● What’s the point of M4R Converters? Well, it’s most relevant to iOS users! Especially those who are tired of listening to the same boring tones on their phone over and over again!

● The M4R file format was created by Apple to differentiate music from ringtones. And, by becoming familiar with the process (which we’ve illustrated in many details in the article above), you can flex your creativity a bit and control just what tones are coming out of your phone!

● It’s not all that difficult to create M4Rs either! There are several methods that you can try — online, iTunes, third-party software, and so much more!

● And, you can make these ringtones from pretty much any format — whether you’re converting from MP3, MOV, WAV, FLAC, WMA, etc.

Try It Free Try It Free

M4R is an audio file extension that was created by Apple to separate regular songs and audio from ringtones

As for methods of converting from your more general file extension formats to M4R, we’ve prepared a whole guide below — where we’ve outlined some of the more important things that you should know about M4R converters and how to use them.

In this article

01 [Why Convert Mp3 to M4R?](#Part 1)

02 [How to Convert Mp3 to M4R?](#Part 2)

03 [How to Convert M4A to M4R?](#Part 3)

Part 1 Why Convert MP3 to M4R?

Let’s start with a bit of an overview of M4R and M4R Converters first! We touched upon this subject in the introduction, but we thought it would be best to expand on the subject here for better understanding. First, let’s talk about what an M4R converter is usually like. Then, let’s talk about why someone might convert from MP3 to M4R.

01M4R Converter Key Features

Here’s a list of some key features that you should look for in an M4R Converter:

● Your average M4R Converter should allow you to convert to M4R from general audio files. That includes the following: MP3, WAV, WMA, AIFF, AMR, FLAC, MKA, WMV, and so much more.

● It should also allow you to ‘extract’ audio from videos (whether it is a MPEG-4, MOV, AVI, etc.)

● The M4R converter would prove even more useful if it allowed you to trim small segments of audio or video (with exact start and end time) so that you can specify which part should play as a ringtone.

● A method of previewing trimmed content prior to conversion would also be helpful so that you won’t have to undergo the process again and again.

● Its settings should also be adjustable or the interface intuitive, allowing you to easily choose or discover the output folder, adjust audio bitrate, and so on.

02Best Three Reasons Why Convert MP3 to M4R

There are several reasons why you might want to use an M4R converter to change from MP3 to M4R, these reasons include:

● Creating iPhone Ringtone: The main purpose of converting to M4R is, of course, to create iPhone ringtones. This file extension was created by Apple specifically to differentiate between songs and ringtones. And, if you’re a regular iOS user but are not a fan of the basic iOS ringtones, learning how to create M4R files would be beneficial in opening your horizons.

● Transfer Ringtones to iPhone: Of course, once the M4R is created for use, it would need to be transferred. This is much easier if it stays in this format!

● Making General M4R Audio: Although not as common, some users see the benefit of using M4R audio for other reasons (i.e., content creators sometimes use M4R audio as a sound-effect for videos). Thus, knowing how to convert from MP3 to MP4 usually proves to be useful for them.

Part 2 How to Convert Mp3 to M4R?

Now, let’s start with a more in-depth tutorial on how to actually convert MP3 to M4R! In this case, specifically, we’ll be providing three different examples. Starting with an online solution and then following it up with the general iTunes conversion and the more involved software conversion!

01How to Convert MP3 to M4R Online?

As mentioned, the first M4R Converter on this list is an online one! There are plenty of these kinds of online converter tools available, and they all pretty much work the same way, so the example we’ll be showing below is more of an all-purpose kind of affair. However, just in case you’re curious, the tool we’ll be using for our examples is the Converter from Audio Tool Set!

**Step 1: Visit Online Converter Website!

First! Open the M4R Converter online tool that you want to use! If you want to follow along with our examples, a URL has been provided for you below:

**Step 2: Upload MP3 File

Next, it’s time to upload the MP3 file that you want to convert to M4R!

Usually, all you have to do for this is click the ‘Upload’ button or drag-and-drop the file onto the specified area. But, in some cases, the M4R converter may also allow you to upload via a link or from cloud-based storage (i.e., Dropbox.)

**Step 3: Select M4R as Output Format!

Once your MP3 file has been uploaded, select the format that you want it to be converted into. This may have defaulted to M4R or you may be given the chance to choose yourself (as is shown in the image below.)

**Step 4: Select Convert!

The next thing you need to do is to simply select the ‘CONVERT’ option to begin processing the change from MP3 to M4R!

**Step 5: Download Converter M4R!

Once the conversion is done, you should now have been given the option to download the finished M4R. Click ‘DOWNLOAD’ and you’re done!

012. How to convert MP3 to M4R on iTunes?

Of course, as an Apple File Extension, it only makes sense that Apple provides its users an easy way to convert general audio to M4R! In this case, we’ll be showing you another method to convert from MP3 to M4R with Apple’s own iTunes! Of course, if you want to follow along with this next example, you’ll have to download and install the software (for Windows users) before proceeding.

**Step 1: Add File or Folder to Library!

Once you have iTunes installed, launch the program and go to ‘File’ > ‘Add File to Library’ or ‘Add Folder to Library’ to upload the MP3 file(s) that you want to convert to M4R!

**Step 2: Select MP3 and Adjust Timing!

Since M4R ringtones are limited to 40 seconds only, you’ll need to adjust timing prior to conversion if you want the ringtone to start and end at a specific time.

This is possible to do by selecting the song from your library and right clicking so you can access the ‘OPTIONS’ tab (shown below)! Under the Options tab, you’ll be able to specify the start and stop time for your chosen MP3!

Click ‘OK’ when done in order to save any changes!

**Step 3: Convert to Version!

Next, with the MP3 file still selected, go to the ‘FILE’ tab (shown in the image below) and then click ‘CONVERT’ > ‘Create Version’!

**Step 4: Go to the Destination Folder!

After the conversion has been finished, locate the file’s destination folder. You’ll notice that the file extension of the file is .M4A but this is easy enough to change.

Just rename the file extension to .M4R (example shown below) and click ‘YES’ to confirm the change! In this way, you’ve managed to convert MP3 to M4R with iTunes!

013. How to Convert MP3 to M4R Online Free with Ringtone Maker?

For this last example of converting MP3 to M4R, we’ve decided to show-off the ringtone maker, Wondershare TunesGo! This program is, of course, more than just a ringtone maker, but the function that we’ll be exploring will be the process of making an iPhone Ringtone from an MP3 file to an M4R (start to finish!)

**Step 1: Launch Program and Connect iPhone to Computer!

First, launch the M4R converter software on your desktop and connect your iPhone to your computer! If you want to use the program that we’re showing off in this example, the URL has been provided below:

**Step 2: Select Ringtone Maker

Once the program has been launched, go to the ‘MUSIC’ tab and select “Ringtone Maker” (pointed out in the image below.)

**Step 3: Select Music File!

A secondary window should appear after you select the ‘Ringtone Maker’ option. Here, the first thing you have to do is upload the music file that you want to convert.

For the software that we’re using as an example, you can choose to upload ‘Local Music’ from your computer or ‘Device Music’ from the music that you have stored in your connected iPhone. We’ll be explaining the different methods to select a music file in the three following steps!

**Step 4: Local Upload - Open!

If you select ‘Local Music’ a system window will appear asking you to select the music file that you want to convert to M4R. Do so and click ‘OPEN!’

**Step 5: Device Music - SELECT!

For the ‘Device Music’ option, another program window will appear. This time, with all the music on your device. You can select the music file you want to convert from here! Click ‘Select’ when done!

**Step 6: TunesGo Library!

For the last method of selecting a music file, all you have to do is select a file from the ‘MUSIC’ tab of TunesGo, right-click on said file, and then select ‘Ringtone Maker’ on the pop-up that appears (shown below).

**Step 7: Trim and Save!

Once you’ve chosen the music file you want to convert, you can now:

● Trim the file to specify which part of the file you want to convert (40 seconds only for a proper Ringtone!)

● Use the ‘Ringtone Audition’ option to preview your trimmed audio.

● And, finally, you can save the finished ringtone directly to your PC or Device!

In this way, not only have you managed to convert from MP3 to M4R cleanly, but you can also use it right away on either your PC or iPhone!

Part 3 How to Convert M4A to M4R?

Another Apple extension file that you might recognize is M4A! This was mentioned briefly in a previous tutorial, but it might be more familiar to others as ‘compressed’ Apple Music. This is what your audio becomes when processed through iTunes. It’s also known as MPEG-4 Audio, and its main purpose is to compress the size of an audio file (compared to MP3) without compromising the quality.

01How to convert M4A to M4R on Windows?

This process was mentioned briefly in Part 2, Section 3 of this article, but we’ll be going through the easiest method of converting M4A to M4R on Windows below! This method is possible only because the formats are pretty much the same. The only difference lies in how they are categorized.

**Step 1: View File Extensions!

The first step to convert M4A to M4R is to open the folder in which your M4A audio is stored. There, make sure that you have ‘File Name Extensions’ selected under the ‘VIEW’ tab (pointed out in the image below).

This will allow you to view and edit the file extension of a given file.

**Step 2: Rename M4A to M4R!

Next, select the M4A that you want to convert and right-click so that you can choose the ‘Rename’ option on the pop-up that appears.

**Step 3: Change M4A to M4R

With ‘File Name Extensions’ on, you can edit the file extension as well! Of course, this is not possible for all conversions. But, as mentioned, since M4A and M4R files are pretty much the same, you can do so without damaging the file!

Meaning, you can change M4A to M4R without worrying about it being unusable!

012. How to Convert M4A to M4R with iTunes

This process was already explained in Part 2, Section 2 of this article. But, since it’s important to provide this perspective we’ll be going through the process again. This time, with the intention of converting an M4A music file to an M4R!

**Step 1: Add File to iTunes Library!

First, add the M4A file to your iTunes library! (You can use the drag-and-drop feature or select ‘Add File’ or ‘Add folder’ under the ‘FILE’ tab).

**Step 2: Create to M4R!

Once your M4A audio file has been uploaded, make sure that it’s selected and then select ‘Create Version’ for it (the option can be found under the ‘FILE’ tab > ‘Convert’!)

**Step 3: Convert M4A to M4R

Once the version of the file has been created (which comes out as M4A), you can use the method we showed in Section 3, Part 1 of this article to change the M4A to M4R simply by rewriting the file extension name.

03How to Convert M4A to M4R Online

For this next part, we’ll be echoing another one of our earlier tutorials! Only, this time, we’ll be focusing on converting M4A to M4R online with an M4R converter online! Specifically, the one we introduced previously — Audio Tool Set!

**Step 1: Online M4R Converter

Audio Tool Set offers an M4A to M4R converter that you can select under the ‘CONVERT AUDIO’ tab!

**Step 2: Upload M4A File!

Once you’ve been moved to the free M4A to M4R converter, select the ‘UPLOAD M4A’ option to browse your PC for the M4A file that you want to convert.

**Step 3: Confirm M4R Conversion Format!

If you’re using the M4A to M4R Converter you can skip this step. But, if not, make sure that you have chosen ‘M4R’ as your desired conversion format!

**Step 4: Convert M4A to M4R!

With all of that in order, select ‘CONVERT’ to move forward.

**Step 5: Download Converted M4R!

Finally, with the conversion done, you can now download the converted file to use as you will! This can be done by selecting the ‘DOWNLOAD’ option!

04How to Create and How to Open an M4A File?

If you want detailed instructions on how to create an M4A file, please refer to Part 2, Section 2 of this article, or Part 3, Section 2. In both sections, we demonstrated how one can create an M4A file by using the ‘Create Version’ feature that iTunes offers.

In that same vein, if you want to be able to open an M4A file, iTunes is your best bet! Although, it should also be said that some of the more advanced media players (and audio players), like QuickTime or Media Player, can open M4A files as well!

05Which Other Formats M4A Can Be Converted into and Why?

There are numerous file formats that you can convert M4A into. If you want examples: you can convert M4A to M4R, MP3 to M4A, WAV to M4A, FLAC to M4A, OGG to M4A, WMA to M4A, and so much more! Of course, if you want more advanced M4A conversions, you might want to consider using a more advanced tool. One such M4A converter that we recommend is Filmora Pro!

Wondershare Filmora Video Editor is an all-in-one video editing software that will allow you to convert M4A to M4R (and all sorts of other audio and video file formats) so that you can make use of the file for all your projects! The best part of using a video editor like Filmora, of course, is that once you’ve converted the file, you can use it immediately — there’s no need to wait, you can finish your project right then and there, making it unnecessary for you to go searching for any other solution.

Wondershare Filmora - Best Video Editor for Mac/Windows

Try It Free Try It Free

5,481,435 people have downloaded it.

Build unique custom animations without breaking a sweat.

Focus on creating epic stories and leave the details to Filmora’s auto features.

Start a creative adventure with drag & drop effects and endless possibilities.

Filmora simplifies advanced features to save you time and effort.

Filmora cuts out repetition so you can move on to your next creative breakthrough.

Key Takeaways from This Episode

● What’s the point of M4R Converters? Well, it’s most relevant to iOS users! Especially those who are tired of listening to the same boring tones on their phone over and over again!

● The M4R file format was created by Apple to differentiate music from ringtones. And, by becoming familiar with the process (which we’ve illustrated in many details in the article above), you can flex your creativity a bit and control just what tones are coming out of your phone!

● It’s not all that difficult to create M4Rs either! There are several methods that you can try — online, iTunes, third-party software, and so much more!

● And, you can make these ringtones from pretty much any format — whether you’re converting from MP3, MOV, WAV, FLAC, WMA, etc.

Get Started with Linux on Your Chromebook: A Comprehensive Installation Guide

How to Install Linux on Chromebook

Ollie Mattison

Mar 27, 2024• Proven solutions

Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.

Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.

• Part 1: Preparing before installing Linux OS on Chromebook
• Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
• Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 5: Recommended Linux Video Editing Software

Part 1: Preparing before installing Linux OS on Chromebook

The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.

• Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
• Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
• Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.

Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook

After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.

1. Acessing the developer mode

The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.

2. Installing Chroot

At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.

Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.

3. Optimizing your new OS

You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.

4. Remove Chroot from your Chromebook

If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.

Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu

An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.

1. Preparation for the installation

Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.

2. Installing ChrUbuntu

Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.

Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.

3. Uninstall ChrUbuntu

Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.

This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.

Part 4: How to Dual-Boot a Chromebook Using Gallium OS

If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.

1. Preparation for the installation

In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.

2. Enabling the Legacy Mode

Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.

3. Installation process

If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.

Which Method is the Best?

Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.

On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.

Part 5: Recommended Linux Video Editing Software: Lightworks

Price: $24.99/month, although free versions of the software are also available.

What we like: A powerful video and audio editor perfectly suited for the production of professional video content.

What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.

Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.

The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.

Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.

• Part 1: Preparing before installing Linux OS on Chromebook
• Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
• Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 5: Recommended Linux Video Editing Software

Part 1: Preparing before installing Linux OS on Chromebook

The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.

• Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
• Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
• Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.

Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook

After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.

1. Acessing the developer mode

The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.

2. Installing Chroot

At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.

Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.

3. Optimizing your new OS

You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.

4. Remove Chroot from your Chromebook

If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.

Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu

An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.

1. Preparation for the installation

Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.

2. Installing ChrUbuntu

Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.

Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.

3. Uninstall ChrUbuntu

Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.

This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.

Part 4: How to Dual-Boot a Chromebook Using Gallium OS

If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.

1. Preparation for the installation

In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.

2. Enabling the Legacy Mode

Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.

3. Installation process

If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.

Which Method is the Best?

Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.

On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.

Part 5: Recommended Linux Video Editing Software: Lightworks

Price: $24.99/month, although free versions of the software are also available.

What we like: A powerful video and audio editor perfectly suited for the production of professional video content.

What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.

Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.

The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.

Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.

• Part 1: Preparing before installing Linux OS on Chromebook
• Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
• Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 5: Recommended Linux Video Editing Software

Part 1: Preparing before installing Linux OS on Chromebook

The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.

• Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
• Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
• Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.

Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook

After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.

1. Acessing the developer mode

The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.

2. Installing Chroot

At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.

Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.

3. Optimizing your new OS

You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.

4. Remove Chroot from your Chromebook

If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.

Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu

An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.

1. Preparation for the installation

Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.

2. Installing ChrUbuntu

Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.

Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.

3. Uninstall ChrUbuntu

Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.

This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.

Part 4: How to Dual-Boot a Chromebook Using Gallium OS

If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.

1. Preparation for the installation

In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.

2. Enabling the Legacy Mode

Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.

3. Installation process

If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.

Which Method is the Best?

Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.

On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.

Part 5: Recommended Linux Video Editing Software: Lightworks

Price: $24.99/month, although free versions of the software are also available.

What we like: A powerful video and audio editor perfectly suited for the production of professional video content.

What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.

Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.

The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

Chromebooks are an excellent choice for educational institutions or businesses that require their employees to have constant access to the Internet. Even though these devices are a perfect tool that can accompany you on business trips and enable you to answer important emails or have access to crucial information stored on the cloud, performing more demanding tasks, like video editing, is still a challenge. However, it is far from impossible, although you may have to take a few extra steps before running a video editing software on your Chromebook.

Chrome OS is a Linux based environment and for that reason, Chromebook owners who would like to use professional editing software on their Chromebooks can install a Linux OS that will enable them to use programs such as Lightworks that are perfectly suited for high-end video editing. There are two different ways to install Linux on a Chromebook, you can either do it using Gallium OS or ChrUbuntu or in a Chroot environment using Crouton. Each of these methods is relatively easy and we will take you through the process step by step. Here’s how you can install Linux on your Chromebook.

• Part 1: Preparing before installing Linux OS on Chromebook
• Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu
• Part 4: How to Install Linux as a Chroot Using Crouton on Chromebook
• Part 5: Recommended Linux Video Editing Software

Part 1: Preparing before installing Linux OS on Chromebook

The first step of the process of installing the Linux OS is the decision itself, and you need to have all the necessary information before you decide to install a Linux OS on your Chromebook.

• Make sure that the version of Chromebook you have is capable of supporting a Linux OS. Your device must be equipped with an ARM or Intel chip in order to be able to run the version of Linux OS you want to install. Although both chips will allow you to go through the process, running closed source software such the Steam is only possible with Intel chips.
• Regardless of which method of installing Linux OS you choose, you will have to switch to the Developer Mode, a special built-in function that allows you to install the unapproved operating system, among other things.
• Now that you are aware of the requirements and risks, you will have to backup all the files you have on your Chromebook because once you switch to the Developer Mode all the information stored locally will be erased. You can save the files on another computer or on the cloud depending on how much data you need to move and which one is more convenient for you.

Part 2: How to Install Linux as a Chroot Using Crouton on Chromebook

After you have stored all your data safely, your Chromebook is ready for the beginning of the installation process of the secondary operating system. You will have to perform a series of actions that will allow you to start the installation, starting from accessing the Developer Mode.

1. Acessing the developer mode

The first step of the process is to reboot your system, while your Chromebook is on. In order to do so hold Escape and Refresh keys on your keyboard and then hit the power button. Once your device is back online you will find yourself in the recovery mode, and you will see a message telling you to insert a recovery disc. Instead of inserting the disc, hold Ctrl+D and wait for OS verification menu to appear on the screen. At this point, if you are still having second thoughts about this process, you can hit the spacebar to return to recovery mode, or press Enter to proceed. Hitting Enter will delete all the data stored on your device and take you into the Developer Mode. Once your Chromebook lets you know that you are now in the Developer Mode, reboot the system and install a fresh version of the Chrome OS. Insert your login information and follow the instructions until you are looking at the Chrome OS desktop.

2. Installing Chroot

At this stage of the process, your Chromebook is ready for the installation of the Crouton environment. Crouton is a series of scripts that makes running a Linux OS much easier, especially for inexperienced users. In order to download Crouton, go to GitHub and find the download link, detailed instructions or extensions that can add more functionality to your OS. Once the installation file or files are in the Download folder, your next step is to access the Chromebook’s terminal a feature called ‘Crosh’. The fastest way to do this is to hold CTRL + ALT keys and then hit the T key. This action will cause the Chrome window to appear on the screen, and you will need to type the ‘shell’ command without using quotation marks. Afterwards, enter the following command: ‘sudo sh ~/Downloads/crouton -t xfce’ and if you want to install extensions you will have to add ‘xfce,extension’ command at the end.

Press the Enter key and wait for the system to start setting up the Chroot. This process may take a while, so it is important to be patient, but more importantly, do not interfere with it in any way. Installation of your secondary OS is now on the way, and you may be asked to insert your login data, like your Gmail username and password. Wait patiently until the process is over and then return to shell and enter this command: ‘sudo enter-chroot startxfce4’. Your screen will go black for a while, but after the black screen is gone your Chromebook will be in the freshly installed Linux OS.

3. Optimizing your new OS

You may have to optimize your new OS in order to improve the experience of using it. Enabling your keyboard’s brightness and volume keys inside the new OS can be done easily by holding CTRL+ALT+T and then typing shell once you’ve accessed Chrome OS’s shell and hit Enter. Issue the following command: ‘sudo sh -e ~/Downloads/crouton-r precise-t keyboard–u’ and then press Enter again. Removing the screen saver or installing more extensions may also be a good way to enable more options in the new OS. Most importantly, you can now download and install the video editing software you want to use for editing your footage.

4. Remove Chroot from your Chromebook

If for some reason you want to uninstall Linux from your Chromebook, simply reboot the system and press the spacebar when the ‘OS verification is off’ message appears on the screen. In this manner, you will exit the Developer Mode and all locally stored data, including all installed environments, will be deleted.

Part 3: How to Dual-Boot a Chromebook Using ChrUbuntu

An alternative option is available for Chromebook users that have Intel based devices like recently released Haswell models. The ChrUbuntu can be installed on the USB stick or external hard-drive or directly to the local memory of your Chromebook. Even though ARM-based machines can also use ChrUbuntu it isn’t advisable because they may perform poorly due to slower processor speeds and less RAM power. Unlike Chroot, ChrUbuntu will not allow you to switch between operating systems without a reboot, and if the system is stored locally, you may need to go through the full system recovery.

1. Preparation for the installation

Like with the previous method you will have to go into the Developer Mode and make sure that you have access to a WiFi connection. When you are asked to provide your login details, instead of entering them press Ctrl+Alt+Forward and then type ‘chronos’ and press Enter. The next step will require you to issue the following command: ‘curl -L -O http://goo.gl/9sgchs ; sudo bash 9sgchs’ and then once more hit Enter. Again press Enter after the information about the installation is displayed on the screen and then you will be asked to decide how much space you want to allocate for Linux installation. Experts say that 9GB is the upper limit. After you’ve made your choice press Enter.

2. Installing ChrUbuntu

Once the partitioning of your hard-drive is completed, you will have to repeat the first several steps from typing ‘chronos’ to pressing enter when information about the installation is displayed on the screen. The installation process is now in progress and you will be occasionally asked to select a few settings, make sure you always click on default. At the end of the installation process, you will have to choose the location where GRUB should be installed, please select /dev/sda, because the failure to do so may interrupt the installation.

Once the installation is completed, restart your Chromebook to finalize the process, and when you see the ‘OS Verification is Off’ notification press Ctrl+L to access Linux or Ctrl+D boot into Chrome OS.

3. Uninstall ChrUbuntu

Removing ChrUbuntu is a relatively painless process that can be completed with just a few simple commands. If the OS is stored locally the only way to erase it is to perform a full system recovery. While all your data located on the cloud will re-sync with your Chromebook, the data stored locally will be deleted, which is why it is important to backup all the important files before starting a system recovery process. The fastest and easiest way to perform a system recovery is by creating a recovery disk from your device. Insert ‘chrome://imageburner’ in your browser’s address bar, and carefully read and follow the instructions.

This Linux removal method will also require you to have a USB stick with a minimum of 4GB of storage space. After you created the disk, you can go into the Recovery Mode, by holding Esc and Refresh buttons simultaneously and then pressing the Power button. In the Recovery Mode, you will be asked to insert the recovery disk and the process will be on the way.

Part 4: How to Dual-Boot a Chromebook Using Gallium OS

If neither Chroot nor ChrUbuntu work for you, using Gallium OS may be the right choice. The Gallium is Xbuntu-based OS that is equipped with touchpad mouse drivers among other advantages it offers over other operating systems. The installation process isn’t complicated, although it may require more effort than installing Crouton.

1. Preparation for the installation

In order to be aware of all the preparation steps, you need to take, you must first find out your device’s Hardware ID number and you can obtain this information by navigating to Chrome://System, Hardware Class within the Chrome OS. Hardware Compatibility page will provide the information regarding the CPU’s family, which can be crucial for the OS’ performance. You can run the installation either from an ISO image on an external USB drive or from the Chrome OS command line using Chrx. We will describe how to install Gallium OS from the Chrome OS command line because the other option doesn’t allow you to dual-boot your Chromebook.

2. Enabling the Legacy Mode

Like previously described, enter the Developer Mode and when the ‘ OS verification is OFF’ notification appears on the screen proceed to enable the Legacy Mode. You can do this by holding CTRL+D keys to enable the Chrome OS to boot in the Developer Mode. After you’ve successfully made this step, press CTRl+ALT+T to access the ‘Crosh’ terminal and then type ‘shell’. At the ‘chronos/localhost/$ issue the following command: ‘sudo crossystem dev_boot_legacy=1’. Update and install all the necessary firmware by running the Firmware Utility Script.

3. Installation process

If you choose to install Gallium OS through Chrome OS command line using Chrx that will enable you to dual-boot your Chromebook, you should start by booting the device into Chrome OS and configuring networking. The next step you’ll need to take is switching to a virtual terminal by holding Ctrl+Alt+F2, and then you should log in as user chronos without a password. Once you’ve completed this step issue the following command: ‘curl -O https://chrx.org/go && sh go’ and follow the on-screen instructions to repartition your hard-drive and install the Gallium OS. Once the installation is over reboot the device and press Ctrl+L when the ‘OS Verification is Off’ notification appears on the screen to boot Gallium OS or hold Ctrl+D to access Chrome OS. After the Gallium OS is successfully installed on your Chromebook you can start using programs such as Skype or Lightworks.

Which Method is the Best?

Each of the options to install a Linux OS on your Chromebook we described has its advantages and disadvantages. It is our opinion that the Crouton method is the easiest and the fastest. Furthermore, this method enables you to switch between your primary and secondary OS without the need to reboot the device and the Downloads folder makes working in both environments much easier.

On the other hand, other methods require more knowledge about the Linux OS installation process and switching between OS’ is not that simple. If you are looking for an easy way to dual-boot your Chromebook that best way to do it is to install Linux as a Chroot using Crouton.

Part 5: Recommended Linux Video Editing Software: Lightworks

Price: $24.99/month, although free versions of the software are also available.

What we like: A powerful video and audio editor perfectly suited for the production of professional video content.

What we don’t like: The software isn’t easy to use and inexperienced editors will find it difficult to use at first.

Lightworks Resolve may not be as popular as Adobe Premiere Pro or Final Cut Pro, but that doesn’t mean that this video editing software isn’t as capable as its more popular counterparts.

The software is compatible with Mac, Windows, and Linux OS, which makes it a perfect choice for Chromebook users that have a Linux OS installed on their devices. Lightworks features literally every editing tool imaginable and for that reason, it is a perfect choice for editing videos you would like to upload to Vimeo or YouTube or high-end professional projects. This editing software offers plenty of transitions and visual effects that will help its users to create seamless jumps between shots and visually impressive videos.

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Subtitle Your Way to Success: FCPX Captioning Made Easy

How to Add Subtitles/Captions in Final Cut Pro X?

Benjamin Arango

Oct 26, 2023• Proven solutions

Adding Final Cut Pro subtitles and captions is a great thing to expand your audience base, and thus the trend of adding captions and subtitles is becoming relevant day by day. There is a whole process to add Final Cut Pro captions and subtitles, which we are going to discuss below.

Let’s check if there is any difference between captions and subtitles used in FCPX. Even though both these texts tend to appear at the bottom of the video screen, they have different purposes.

As we all know, subtitles depict foreign languages other than the language shown in the actual video. So, they are used to appearing on-screen frequently as the speaker speaks.

On the other hand, the captions display every kind of audio information, including sound effects, music, and background noises (see how to remove background noise in FCPX here) . Every Caption represents that viewer hasn’t any audio clues and thus displays them over the video.

You may also want to see this: What Makes the Best Lower Thirds in Final Cut Pro X?

Part 1: How to Add Subtitles/Captions in Final Cut Pro X?

Before you study the steps required to add subtitles to Final Cut Pro, here are some quick facts about the format of captions supported by FCPX.

• ITT (iTunes Timed Text)

It is required to deliver the contents of Caption to the iTunes store.

• CEA-608 (SCC)

It is a standard caption format for web videos and broadcasts.

• SRT (SubRip)

It is a simple and popular format used in online videos.

Steps to Add Subtitles or Captions in FCPX

Step 1: Create Caption Roles

You need first to create caption roles to start adding captions to the timeline. Go to Modify > Edit Roles and then select Captions. Then, select CEA-608, choose your language, and hit the Apply button.

Step 2: Add Captions

Position the playhead to where you have to set the Caption in the timeline. You need to hit the Edit tab and then select Captions > Add Caption.

Select the drop-down menu across the language and select CEA-608.

Now, you can add captions in the preview window or the Captions Text given alongside.

Also, you can adjust the duration of the Caption by dragging it in the timeline.

Step 3: Export a Caption Role

Press Command + E or go to File > Export to open the Export preview window. Now, you can select the name and save your video in standard export options. Hit the Roles tab given at the top.

Then, click the small Captions icon to reveal the menu. Select the subtitles or captions to import alongside the Burn in Captions tab. Hit the OK button and proceed with export as usual.

Thus, similar steps are required even if you want to add subtitles.

Too many steps? Then try a beginner-friendly editing tool, Filmora!

Part 2: Free Subtitles Plugins for Final Cut Pro X

Let’s list some incredibly efficient and free subtitles tools that you can use for Final Cut Pro X.

• Veed

Veed is one of the best video editing tools if you are looking for something like automatic subtitles. You are only required to upload your audio or video into this online software and hit the Subtitles tab to get quick captions. Thus, you will only need to import those subtitles or captions and save your time from manual typing.

• Quick Caption

The Quick Caption is another free tool available in Mac App Store to automatically transcribe your audio or video clips. It quickly creates FCPXML and SRT format captions. It also records the ending and starting timestamp for every Caption for further reference. You also get the facility to customize these subtitles based on shadow, font, style, and face color in the Style Editor.

• Word Pop by Stupid Raisins

It is the go-to free plugin by Stupid Raisins to display the text in animated templates. It generally depicts different kinds of paragraph titles, which you can edit as per the subtitles. It is one of the ideal plugins to impart professionalism into your videos with catchy descriptions. There are lots of templates available to select among them. Also, the simple drag and drop feature won’t let you down in any scenario of adding subtitles or captions effectively.

Part 3: Tips for adding Subtitles/Captions in Final Cut Pro X

Given below are some quick tips to add Final Cut Pro captions or subtitles.

• Use YouTube

You can use the transcriptions feature of YouTube to import captions file into your footage quickly. It will also save lots of time typing the same text. You need to upload footage on YouTube as a private video and then download it as a .srt file. Now, you can use this file as a base to correct and adjust your captions.

• Exporting

Every Caption set must export individually in Final Cut Pro X. However; there is a shortcut to it using the Compressor feature. Send your captions to Compressor by clicking the File> Send to Compressor.

Some may wonder, what is Compressor exactly？ Click here to learn how to use the Compressor in FCPX.

• Use the keyboard shortcut keys

You can use various keyboard shortcut keys to add the subtitles and captions into the video quickly. There are shortcut keys available at each step of adding these captions or subtitles in Final Cut Pro X.

Click here for some best shortcuts we summarised for you!

Conclusion

So, this is all about adding Final Cut Pro subtitles and captions via the step-by-step guide. Captions and Subtitles are an excellent way to expand your audience base across all regions globally since it removes the limitations or boundaries set by one language.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

Adding Final Cut Pro subtitles and captions is a great thing to expand your audience base, and thus the trend of adding captions and subtitles is becoming relevant day by day. There is a whole process to add Final Cut Pro captions and subtitles, which we are going to discuss below.

Let’s check if there is any difference between captions and subtitles used in FCPX. Even though both these texts tend to appear at the bottom of the video screen, they have different purposes.

As we all know, subtitles depict foreign languages other than the language shown in the actual video. So, they are used to appearing on-screen frequently as the speaker speaks.

On the other hand, the captions display every kind of audio information, including sound effects, music, and background noises (see how to remove background noise in FCPX here) . Every Caption represents that viewer hasn’t any audio clues and thus displays them over the video.

You may also want to see this: What Makes the Best Lower Thirds in Final Cut Pro X?

Part 1: How to Add Subtitles/Captions in Final Cut Pro X?

Before you study the steps required to add subtitles to Final Cut Pro, here are some quick facts about the format of captions supported by FCPX.

• ITT (iTunes Timed Text)

It is required to deliver the contents of Caption to the iTunes store.

• CEA-608 (SCC)

It is a standard caption format for web videos and broadcasts.

• SRT (SubRip)

It is a simple and popular format used in online videos.

Steps to Add Subtitles or Captions in FCPX

Step 1: Create Caption Roles

You need first to create caption roles to start adding captions to the timeline. Go to Modify > Edit Roles and then select Captions. Then, select CEA-608, choose your language, and hit the Apply button.

Step 2: Add Captions

Position the playhead to where you have to set the Caption in the timeline. You need to hit the Edit tab and then select Captions > Add Caption.

Select the drop-down menu across the language and select CEA-608.

Now, you can add captions in the preview window or the Captions Text given alongside.

Also, you can adjust the duration of the Caption by dragging it in the timeline.

Step 3: Export a Caption Role

Press Command + E or go to File > Export to open the Export preview window. Now, you can select the name and save your video in standard export options. Hit the Roles tab given at the top.

Then, click the small Captions icon to reveal the menu. Select the subtitles or captions to import alongside the Burn in Captions tab. Hit the OK button and proceed with export as usual.

Thus, similar steps are required even if you want to add subtitles.

Too many steps? Then try a beginner-friendly editing tool, Filmora!

Part 2: Free Subtitles Plugins for Final Cut Pro X

Let’s list some incredibly efficient and free subtitles tools that you can use for Final Cut Pro X.

• Veed

Veed is one of the best video editing tools if you are looking for something like automatic subtitles. You are only required to upload your audio or video into this online software and hit the Subtitles tab to get quick captions. Thus, you will only need to import those subtitles or captions and save your time from manual typing.

• Quick Caption

The Quick Caption is another free tool available in Mac App Store to automatically transcribe your audio or video clips. It quickly creates FCPXML and SRT format captions. It also records the ending and starting timestamp for every Caption for further reference. You also get the facility to customize these subtitles based on shadow, font, style, and face color in the Style Editor.

• Word Pop by Stupid Raisins

It is the go-to free plugin by Stupid Raisins to display the text in animated templates. It generally depicts different kinds of paragraph titles, which you can edit as per the subtitles. It is one of the ideal plugins to impart professionalism into your videos with catchy descriptions. There are lots of templates available to select among them. Also, the simple drag and drop feature won’t let you down in any scenario of adding subtitles or captions effectively.

Part 3: Tips for adding Subtitles/Captions in Final Cut Pro X

Given below are some quick tips to add Final Cut Pro captions or subtitles.

• Use YouTube

You can use the transcriptions feature of YouTube to import captions file into your footage quickly. It will also save lots of time typing the same text. You need to upload footage on YouTube as a private video and then download it as a .srt file. Now, you can use this file as a base to correct and adjust your captions.

• Exporting

Every Caption set must export individually in Final Cut Pro X. However; there is a shortcut to it using the Compressor feature. Send your captions to Compressor by clicking the File> Send to Compressor.

Some may wonder, what is Compressor exactly？ Click here to learn how to use the Compressor in FCPX.

• Use the keyboard shortcut keys

You can use various keyboard shortcut keys to add the subtitles and captions into the video quickly. There are shortcut keys available at each step of adding these captions or subtitles in Final Cut Pro X.

Click here for some best shortcuts we summarised for you!

Conclusion

So, this is all about adding Final Cut Pro subtitles and captions via the step-by-step guide. Captions and Subtitles are an excellent way to expand your audience base across all regions globally since it removes the limitations or boundaries set by one language.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

Adding Final Cut Pro subtitles and captions is a great thing to expand your audience base, and thus the trend of adding captions and subtitles is becoming relevant day by day. There is a whole process to add Final Cut Pro captions and subtitles, which we are going to discuss below.

Let’s check if there is any difference between captions and subtitles used in FCPX. Even though both these texts tend to appear at the bottom of the video screen, they have different purposes.

As we all know, subtitles depict foreign languages other than the language shown in the actual video. So, they are used to appearing on-screen frequently as the speaker speaks.

On the other hand, the captions display every kind of audio information, including sound effects, music, and background noises (see how to remove background noise in FCPX here) . Every Caption represents that viewer hasn’t any audio clues and thus displays them over the video.

You may also want to see this: What Makes the Best Lower Thirds in Final Cut Pro X?

Part 1: How to Add Subtitles/Captions in Final Cut Pro X?

Before you study the steps required to add subtitles to Final Cut Pro, here are some quick facts about the format of captions supported by FCPX.

• ITT (iTunes Timed Text)

It is required to deliver the contents of Caption to the iTunes store.

• CEA-608 (SCC)

It is a standard caption format for web videos and broadcasts.

• SRT (SubRip)

It is a simple and popular format used in online videos.

Steps to Add Subtitles or Captions in FCPX

Step 1: Create Caption Roles

You need first to create caption roles to start adding captions to the timeline. Go to Modify > Edit Roles and then select Captions. Then, select CEA-608, choose your language, and hit the Apply button.

Step 2: Add Captions

Position the playhead to where you have to set the Caption in the timeline. You need to hit the Edit tab and then select Captions > Add Caption.

Select the drop-down menu across the language and select CEA-608.

Now, you can add captions in the preview window or the Captions Text given alongside.

Also, you can adjust the duration of the Caption by dragging it in the timeline.

Step 3: Export a Caption Role

Press Command + E or go to File > Export to open the Export preview window. Now, you can select the name and save your video in standard export options. Hit the Roles tab given at the top.

Then, click the small Captions icon to reveal the menu. Select the subtitles or captions to import alongside the Burn in Captions tab. Hit the OK button and proceed with export as usual.

Thus, similar steps are required even if you want to add subtitles.

Too many steps? Then try a beginner-friendly editing tool, Filmora!

Part 2: Free Subtitles Plugins for Final Cut Pro X

Let’s list some incredibly efficient and free subtitles tools that you can use for Final Cut Pro X.

• Veed

Veed is one of the best video editing tools if you are looking for something like automatic subtitles. You are only required to upload your audio or video into this online software and hit the Subtitles tab to get quick captions. Thus, you will only need to import those subtitles or captions and save your time from manual typing.

• Quick Caption

The Quick Caption is another free tool available in Mac App Store to automatically transcribe your audio or video clips. It quickly creates FCPXML and SRT format captions. It also records the ending and starting timestamp for every Caption for further reference. You also get the facility to customize these subtitles based on shadow, font, style, and face color in the Style Editor.

• Word Pop by Stupid Raisins

It is the go-to free plugin by Stupid Raisins to display the text in animated templates. It generally depicts different kinds of paragraph titles, which you can edit as per the subtitles. It is one of the ideal plugins to impart professionalism into your videos with catchy descriptions. There are lots of templates available to select among them. Also, the simple drag and drop feature won’t let you down in any scenario of adding subtitles or captions effectively.

Part 3: Tips for adding Subtitles/Captions in Final Cut Pro X

Given below are some quick tips to add Final Cut Pro captions or subtitles.

• Use YouTube

You can use the transcriptions feature of YouTube to import captions file into your footage quickly. It will also save lots of time typing the same text. You need to upload footage on YouTube as a private video and then download it as a .srt file. Now, you can use this file as a base to correct and adjust your captions.

• Exporting

Every Caption set must export individually in Final Cut Pro X. However; there is a shortcut to it using the Compressor feature. Send your captions to Compressor by clicking the File> Send to Compressor.

Some may wonder, what is Compressor exactly？ Click here to learn how to use the Compressor in FCPX.

• Use the keyboard shortcut keys

You can use various keyboard shortcut keys to add the subtitles and captions into the video quickly. There are shortcut keys available at each step of adding these captions or subtitles in Final Cut Pro X.

Click here for some best shortcuts we summarised for you!

Conclusion

So, this is all about adding Final Cut Pro subtitles and captions via the step-by-step guide. Captions and Subtitles are an excellent way to expand your audience base across all regions globally since it removes the limitations or boundaries set by one language.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

Adding Final Cut Pro subtitles and captions is a great thing to expand your audience base, and thus the trend of adding captions and subtitles is becoming relevant day by day. There is a whole process to add Final Cut Pro captions and subtitles, which we are going to discuss below.

Let’s check if there is any difference between captions and subtitles used in FCPX. Even though both these texts tend to appear at the bottom of the video screen, they have different purposes.

As we all know, subtitles depict foreign languages other than the language shown in the actual video. So, they are used to appearing on-screen frequently as the speaker speaks.

On the other hand, the captions display every kind of audio information, including sound effects, music, and background noises (see how to remove background noise in FCPX here) . Every Caption represents that viewer hasn’t any audio clues and thus displays them over the video.

You may also want to see this: What Makes the Best Lower Thirds in Final Cut Pro X?

Part 1: How to Add Subtitles/Captions in Final Cut Pro X?

Before you study the steps required to add subtitles to Final Cut Pro, here are some quick facts about the format of captions supported by FCPX.

• ITT (iTunes Timed Text)

It is required to deliver the contents of Caption to the iTunes store.

• CEA-608 (SCC)

It is a standard caption format for web videos and broadcasts.

• SRT (SubRip)

It is a simple and popular format used in online videos.

Steps to Add Subtitles or Captions in FCPX

Step 1: Create Caption Roles

You need first to create caption roles to start adding captions to the timeline. Go to Modify > Edit Roles and then select Captions. Then, select CEA-608, choose your language, and hit the Apply button.

Step 2: Add Captions

Position the playhead to where you have to set the Caption in the timeline. You need to hit the Edit tab and then select Captions > Add Caption.

Select the drop-down menu across the language and select CEA-608.

Now, you can add captions in the preview window or the Captions Text given alongside.

Also, you can adjust the duration of the Caption by dragging it in the timeline.

Step 3: Export a Caption Role

Press Command + E or go to File > Export to open the Export preview window. Now, you can select the name and save your video in standard export options. Hit the Roles tab given at the top.

Then, click the small Captions icon to reveal the menu. Select the subtitles or captions to import alongside the Burn in Captions tab. Hit the OK button and proceed with export as usual.

Thus, similar steps are required even if you want to add subtitles.

Too many steps? Then try a beginner-friendly editing tool, Filmora!

Part 2: Free Subtitles Plugins for Final Cut Pro X

Let’s list some incredibly efficient and free subtitles tools that you can use for Final Cut Pro X.

• Veed

Veed is one of the best video editing tools if you are looking for something like automatic subtitles. You are only required to upload your audio or video into this online software and hit the Subtitles tab to get quick captions. Thus, you will only need to import those subtitles or captions and save your time from manual typing.

• Quick Caption

The Quick Caption is another free tool available in Mac App Store to automatically transcribe your audio or video clips. It quickly creates FCPXML and SRT format captions. It also records the ending and starting timestamp for every Caption for further reference. You also get the facility to customize these subtitles based on shadow, font, style, and face color in the Style Editor.

• Word Pop by Stupid Raisins

It is the go-to free plugin by Stupid Raisins to display the text in animated templates. It generally depicts different kinds of paragraph titles, which you can edit as per the subtitles. It is one of the ideal plugins to impart professionalism into your videos with catchy descriptions. There are lots of templates available to select among them. Also, the simple drag and drop feature won’t let you down in any scenario of adding subtitles or captions effectively.

Part 3: Tips for adding Subtitles/Captions in Final Cut Pro X

Given below are some quick tips to add Final Cut Pro captions or subtitles.

• Use YouTube

You can use the transcriptions feature of YouTube to import captions file into your footage quickly. It will also save lots of time typing the same text. You need to upload footage on YouTube as a private video and then download it as a .srt file. Now, you can use this file as a base to correct and adjust your captions.

• Exporting

Every Caption set must export individually in Final Cut Pro X. However; there is a shortcut to it using the Compressor feature. Send your captions to Compressor by clicking the File> Send to Compressor.

Some may wonder, what is Compressor exactly？ Click here to learn how to use the Compressor in FCPX.

• Use the keyboard shortcut keys

You can use various keyboard shortcut keys to add the subtitles and captions into the video quickly. There are shortcut keys available at each step of adding these captions or subtitles in Final Cut Pro X.

Click here for some best shortcuts we summarised for you!

Conclusion

So, this is all about adding Final Cut Pro subtitles and captions via the step-by-step guide. Captions and Subtitles are an excellent way to expand your audience base across all regions globally since it removes the limitations or boundaries set by one language.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Mac Video Editing Essentials: A Yosemite User’s Handbook

How to Edit Video Files on Mac OS X Yosemite

Liza Brown

Mar 27, 2024• Proven solutions

Although Apple’s new operating system - Mac OS X 10.10 Yosemite will bring new vigor to your Mac computer, you may have to face the roadblock when it comes to video editing, since its built-in video editing software iMovie only supports a limited formats. So what would you do then? Have no direction to edit video on Mac OS X 10.10?

Don’t worry. Here a comprehensive and easy-to-use video editor for Yosemite – Wondershare Filmora for Mac is recommended. It supports almost all the popular video formats including AVI, WMV, MP4, FLV, MKV, MOV, 3GP, etc. With it, you can put together your video clips or split to segments to get creative and customized brand new videos. Here is a detailed guide on how to create videos on Yosemite with this smart video editor.

Step 1. Import media files to edit

To import videos, audio, photos to edit, you can go to “File”>”Import Media” or directly drag and drop them to the Media Library of this app. By the way, there is a window which allows you to import media files from your iTunes or iMovie etc. To activate it, just go to “File” > “Resources”. You can also capture a video with the built-in iSight by clicking the “Video Recording” icon above the timeline.

Step 2. Edit videos, audio and photos

When all the media files have been imported to the software, drag and drop them to the respective timeline. Then you can do various video editing tasks as you like.

Basic editing

You have two different ways to edit the video. One is to double click the video and then choose different editing options. The other is to hit the corresponding Trim, Crop, Rotate, Voiceover button on the tool bar.

Edit and enhance audio

If you want to add an additional audio file as the background music to the videos and photos, just drag your favorite audio clip to the music track. To further edit the audio file, just double click the clip. Then the Audio Inspector will pop up for you to adjust different settings like pitch, volume, and speed or add Fade in/out effect. You can also right click the audio to cut, copy or trim the audio file.

Add transition and other effects

This app also allows you to add cool transitions and other effects to your videos and photos. To achieve this, just go to the respective tab in near the Media Library. For more details, please go to the user guide of Filmora for Mac.

Step 3. Export your video creation

After you preview the effect, just click the “Export” button to export the video creator. There are totally five methods: Devices, Formats, YouTube, Vimeo and DVD. Just select any one you want to save or share the edited videos.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Although Apple’s new operating system - Mac OS X 10.10 Yosemite will bring new vigor to your Mac computer, you may have to face the roadblock when it comes to video editing, since its built-in video editing software iMovie only supports a limited formats. So what would you do then? Have no direction to edit video on Mac OS X 10.10?

Don’t worry. Here a comprehensive and easy-to-use video editor for Yosemite – Wondershare Filmora for Mac is recommended. It supports almost all the popular video formats including AVI, WMV, MP4, FLV, MKV, MOV, 3GP, etc. With it, you can put together your video clips or split to segments to get creative and customized brand new videos. Here is a detailed guide on how to create videos on Yosemite with this smart video editor.

Step 1. Import media files to edit

To import videos, audio, photos to edit, you can go to “File”>”Import Media” or directly drag and drop them to the Media Library of this app. By the way, there is a window which allows you to import media files from your iTunes or iMovie etc. To activate it, just go to “File” > “Resources”. You can also capture a video with the built-in iSight by clicking the “Video Recording” icon above the timeline.

Step 2. Edit videos, audio and photos

When all the media files have been imported to the software, drag and drop them to the respective timeline. Then you can do various video editing tasks as you like.

Basic editing

You have two different ways to edit the video. One is to double click the video and then choose different editing options. The other is to hit the corresponding Trim, Crop, Rotate, Voiceover button on the tool bar.

Edit and enhance audio

If you want to add an additional audio file as the background music to the videos and photos, just drag your favorite audio clip to the music track. To further edit the audio file, just double click the clip. Then the Audio Inspector will pop up for you to adjust different settings like pitch, volume, and speed or add Fade in/out effect. You can also right click the audio to cut, copy or trim the audio file.

Add transition and other effects

This app also allows you to add cool transitions and other effects to your videos and photos. To achieve this, just go to the respective tab in near the Media Library. For more details, please go to the user guide of Filmora for Mac.

Step 3. Export your video creation

After you preview the effect, just click the “Export” button to export the video creator. There are totally five methods: Devices, Formats, YouTube, Vimeo and DVD. Just select any one you want to save or share the edited videos.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Although Apple’s new operating system - Mac OS X 10.10 Yosemite will bring new vigor to your Mac computer, you may have to face the roadblock when it comes to video editing, since its built-in video editing software iMovie only supports a limited formats. So what would you do then? Have no direction to edit video on Mac OS X 10.10?

Don’t worry. Here a comprehensive and easy-to-use video editor for Yosemite – Wondershare Filmora for Mac is recommended. It supports almost all the popular video formats including AVI, WMV, MP4, FLV, MKV, MOV, 3GP, etc. With it, you can put together your video clips or split to segments to get creative and customized brand new videos. Here is a detailed guide on how to create videos on Yosemite with this smart video editor.

Step 1. Import media files to edit

To import videos, audio, photos to edit, you can go to “File”>”Import Media” or directly drag and drop them to the Media Library of this app. By the way, there is a window which allows you to import media files from your iTunes or iMovie etc. To activate it, just go to “File” > “Resources”. You can also capture a video with the built-in iSight by clicking the “Video Recording” icon above the timeline.

Step 2. Edit videos, audio and photos

When all the media files have been imported to the software, drag and drop them to the respective timeline. Then you can do various video editing tasks as you like.

Basic editing

You have two different ways to edit the video. One is to double click the video and then choose different editing options. The other is to hit the corresponding Trim, Crop, Rotate, Voiceover button on the tool bar.

Edit and enhance audio

If you want to add an additional audio file as the background music to the videos and photos, just drag your favorite audio clip to the music track. To further edit the audio file, just double click the clip. Then the Audio Inspector will pop up for you to adjust different settings like pitch, volume, and speed or add Fade in/out effect. You can also right click the audio to cut, copy or trim the audio file.

Add transition and other effects

This app also allows you to add cool transitions and other effects to your videos and photos. To achieve this, just go to the respective tab in near the Media Library. For more details, please go to the user guide of Filmora for Mac.

Step 3. Export your video creation

After you preview the effect, just click the “Export” button to export the video creator. There are totally five methods: Devices, Formats, YouTube, Vimeo and DVD. Just select any one you want to save or share the edited videos.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Although Apple’s new operating system - Mac OS X 10.10 Yosemite will bring new vigor to your Mac computer, you may have to face the roadblock when it comes to video editing, since its built-in video editing software iMovie only supports a limited formats. So what would you do then? Have no direction to edit video on Mac OS X 10.10?

Don’t worry. Here a comprehensive and easy-to-use video editor for Yosemite – Wondershare Filmora for Mac is recommended. It supports almost all the popular video formats including AVI, WMV, MP4, FLV, MKV, MOV, 3GP, etc. With it, you can put together your video clips or split to segments to get creative and customized brand new videos. Here is a detailed guide on how to create videos on Yosemite with this smart video editor.

Step 1. Import media files to edit

To import videos, audio, photos to edit, you can go to “File”>”Import Media” or directly drag and drop them to the Media Library of this app. By the way, there is a window which allows you to import media files from your iTunes or iMovie etc. To activate it, just go to “File” > “Resources”. You can also capture a video with the built-in iSight by clicking the “Video Recording” icon above the timeline.

Step 2. Edit videos, audio and photos

When all the media files have been imported to the software, drag and drop them to the respective timeline. Then you can do various video editing tasks as you like.

Basic editing

You have two different ways to edit the video. One is to double click the video and then choose different editing options. The other is to hit the corresponding Trim, Crop, Rotate, Voiceover button on the tool bar.

Edit and enhance audio

If you want to add an additional audio file as the background music to the videos and photos, just drag your favorite audio clip to the music track. To further edit the audio file, just double click the clip. Then the Audio Inspector will pop up for you to adjust different settings like pitch, volume, and speed or add Fade in/out effect. You can also right click the audio to cut, copy or trim the audio file.

Add transition and other effects

This app also allows you to add cool transitions and other effects to your videos and photos. To achieve this, just go to the respective tab in near the Media Library. For more details, please go to the user guide of Filmora for Mac.

Step 3. Export your video creation

After you preview the effect, just click the “Export” button to export the video creator. There are totally five methods: Devices, Formats, YouTube, Vimeo and DVD. Just select any one you want to save or share the edited videos.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Also read: