Unlock Great Sound: A Comprehensive Guide to FCP Audio Editing

How to Edit Audio of a Video on FCP

Benjamin Arango

Mar 27, 2024• Proven solutions

Final Cut Pro (FCP) is one of the most powerful editing tools often used by professional editors around the globe. In this article we are going to teach you 2 simple ways of editing the audio in Final Cut Pro.

You May Also Like: How to Edit YouTube Audio >>

---

Those of you reading this article as a guide to audio editing of videos on Final Cut Pro, needs to remember that this is just a basic tutorial for this professional editing software. However, if you are new to the field of video editing then you should consider using the Wondershare Filmora for Mac . It is a powerful but simple tool that is just the right editing software for beginners. The advanced tools of this software would even allow you to use a lot of special effects like picture in picture, tilt shifts, split-screen, and much more.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

How to edit audio on FCP

There are 2 ways of editing audio of videos on FCP-clip-level audio editing and advanced audio editing.

Section 1 Clip-level audio editing

While dragging the audio or video clip onto the timeline you have surely seen the level line right above the clip waveform. One can just drag the level line and move it up or down for adjusting the dB of any given clip.

The job of the tiny white points on the right and left side of the clip is to apply the fade in and fade out effect on the audio. The left sided point can be dragged to the right to mark the ending of the fade-in effect of the clip. The right point has to be dragged left to set the start of the fade-out point.

Related Article: How to fade in/out audio in Final Cut Pro >>

Note: In this level, any effects and adjustments in audio are applicable for the entire clip including the audio channels within it. All the adjustments in the individual audio channels made by you would be preserved by FCP. This implies that when one reduces the volume for just one channel but increases the volume of the entire clip, then the single channel’s volume is only raised in proportion to the volume of the other channels. Ideally, you should do your edits at the clip-level when you have only one or two audio channels on your video clip.

Section 2: Advanced Audio Editing

The audio of the video can be detached for editing the audio file separately. The Audio Inspector of FCP provides you with all precise controls of audio edit like pan, effect, volume, equalization and audio configuration.

In order to detach the audio, you need to go to Clip > Detach Audio. Or you can just right-click on the video file and click on Detach audio.

Note: There is a fine difference between ‘Detach Audio’ and ‘Expand Audio’. In Expand Audio, the audio clip is synced with the video. For instance, while moving the audio to the timeline, the video clip would also go with it. In case of detaching audio however the audio file would remain as a standalone clip that can be inserted into any portion of the video.

The Audio Inspector would allow you to apply the following effects:

• The volume can be increased by dragging the handle on the right side and lowered by dragging it towards the left.
• Audio Equalization would allow the user to apply various effects (bass, loudness, boost, etc.) on the audio clip. It can also be adjusted by using the in-built audio equalizer.

• Pan- Users can select from a number of Pan modes like surround sound or stereo. When you select ‘surround’, Final Cut Pro would provide you with a Surround Panner which would allow you to fine-tune the effects by moving the white point.

• Effects- for this option one needs to go to the effects browser of the Audio Inspector or just hit comd5. This would allow you to choose many different audio effects such as echo, distortion, spaces and much more. Just double-click on any effect to find a range of editing options.

• Audio Configuration: The audio configuration tool would allow the user to modify the audio channel with mono, stereo, or reverse stereo.

Here’s the video tutorial on how to edit audios in Final Cut Pro:

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Final Cut Pro (FCP) is one of the most powerful editing tools often used by professional editors around the globe. In this article we are going to teach you 2 simple ways of editing the audio in Final Cut Pro.

You May Also Like: How to Edit YouTube Audio >>

---

Those of you reading this article as a guide to audio editing of videos on Final Cut Pro, needs to remember that this is just a basic tutorial for this professional editing software. However, if you are new to the field of video editing then you should consider using the Wondershare Filmora for Mac . It is a powerful but simple tool that is just the right editing software for beginners. The advanced tools of this software would even allow you to use a lot of special effects like picture in picture, tilt shifts, split-screen, and much more.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

How to edit audio on FCP

There are 2 ways of editing audio of videos on FCP-clip-level audio editing and advanced audio editing.

Section 1 Clip-level audio editing

While dragging the audio or video clip onto the timeline you have surely seen the level line right above the clip waveform. One can just drag the level line and move it up or down for adjusting the dB of any given clip.

The job of the tiny white points on the right and left side of the clip is to apply the fade in and fade out effect on the audio. The left sided point can be dragged to the right to mark the ending of the fade-in effect of the clip. The right point has to be dragged left to set the start of the fade-out point.

Related Article: How to fade in/out audio in Final Cut Pro >>

Note: In this level, any effects and adjustments in audio are applicable for the entire clip including the audio channels within it. All the adjustments in the individual audio channels made by you would be preserved by FCP. This implies that when one reduces the volume for just one channel but increases the volume of the entire clip, then the single channel’s volume is only raised in proportion to the volume of the other channels. Ideally, you should do your edits at the clip-level when you have only one or two audio channels on your video clip.

Section 2: Advanced Audio Editing

The audio of the video can be detached for editing the audio file separately. The Audio Inspector of FCP provides you with all precise controls of audio edit like pan, effect, volume, equalization and audio configuration.

In order to detach the audio, you need to go to Clip > Detach Audio. Or you can just right-click on the video file and click on Detach audio.

Note: There is a fine difference between ‘Detach Audio’ and ‘Expand Audio’. In Expand Audio, the audio clip is synced with the video. For instance, while moving the audio to the timeline, the video clip would also go with it. In case of detaching audio however the audio file would remain as a standalone clip that can be inserted into any portion of the video.

The Audio Inspector would allow you to apply the following effects:

• The volume can be increased by dragging the handle on the right side and lowered by dragging it towards the left.
• Audio Equalization would allow the user to apply various effects (bass, loudness, boost, etc.) on the audio clip. It can also be adjusted by using the in-built audio equalizer.

• Pan- Users can select from a number of Pan modes like surround sound or stereo. When you select ‘surround’, Final Cut Pro would provide you with a Surround Panner which would allow you to fine-tune the effects by moving the white point.

• Effects- for this option one needs to go to the effects browser of the Audio Inspector or just hit comd5. This would allow you to choose many different audio effects such as echo, distortion, spaces and much more. Just double-click on any effect to find a range of editing options.

• Audio Configuration: The audio configuration tool would allow the user to modify the audio channel with mono, stereo, or reverse stereo.

Here’s the video tutorial on how to edit audios in Final Cut Pro:

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Final Cut Pro (FCP) is one of the most powerful editing tools often used by professional editors around the globe. In this article we are going to teach you 2 simple ways of editing the audio in Final Cut Pro.

You May Also Like: How to Edit YouTube Audio >>

---

Those of you reading this article as a guide to audio editing of videos on Final Cut Pro, needs to remember that this is just a basic tutorial for this professional editing software. However, if you are new to the field of video editing then you should consider using the Wondershare Filmora for Mac . It is a powerful but simple tool that is just the right editing software for beginners. The advanced tools of this software would even allow you to use a lot of special effects like picture in picture, tilt shifts, split-screen, and much more.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

How to edit audio on FCP

There are 2 ways of editing audio of videos on FCP-clip-level audio editing and advanced audio editing.

Section 1 Clip-level audio editing

While dragging the audio or video clip onto the timeline you have surely seen the level line right above the clip waveform. One can just drag the level line and move it up or down for adjusting the dB of any given clip.

The job of the tiny white points on the right and left side of the clip is to apply the fade in and fade out effect on the audio. The left sided point can be dragged to the right to mark the ending of the fade-in effect of the clip. The right point has to be dragged left to set the start of the fade-out point.

Related Article: How to fade in/out audio in Final Cut Pro >>

Note: In this level, any effects and adjustments in audio are applicable for the entire clip including the audio channels within it. All the adjustments in the individual audio channels made by you would be preserved by FCP. This implies that when one reduces the volume for just one channel but increases the volume of the entire clip, then the single channel’s volume is only raised in proportion to the volume of the other channels. Ideally, you should do your edits at the clip-level when you have only one or two audio channels on your video clip.

Section 2: Advanced Audio Editing

The audio of the video can be detached for editing the audio file separately. The Audio Inspector of FCP provides you with all precise controls of audio edit like pan, effect, volume, equalization and audio configuration.

In order to detach the audio, you need to go to Clip > Detach Audio. Or you can just right-click on the video file and click on Detach audio.

Note: There is a fine difference between ‘Detach Audio’ and ‘Expand Audio’. In Expand Audio, the audio clip is synced with the video. For instance, while moving the audio to the timeline, the video clip would also go with it. In case of detaching audio however the audio file would remain as a standalone clip that can be inserted into any portion of the video.

The Audio Inspector would allow you to apply the following effects:

• The volume can be increased by dragging the handle on the right side and lowered by dragging it towards the left.
• Audio Equalization would allow the user to apply various effects (bass, loudness, boost, etc.) on the audio clip. It can also be adjusted by using the in-built audio equalizer.

• Pan- Users can select from a number of Pan modes like surround sound or stereo. When you select ‘surround’, Final Cut Pro would provide you with a Surround Panner which would allow you to fine-tune the effects by moving the white point.

• Effects- for this option one needs to go to the effects browser of the Audio Inspector or just hit comd5. This would allow you to choose many different audio effects such as echo, distortion, spaces and much more. Just double-click on any effect to find a range of editing options.

• Audio Configuration: The audio configuration tool would allow the user to modify the audio channel with mono, stereo, or reverse stereo.

Here’s the video tutorial on how to edit audios in Final Cut Pro:

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Final Cut Pro (FCP) is one of the most powerful editing tools often used by professional editors around the globe. In this article we are going to teach you 2 simple ways of editing the audio in Final Cut Pro.

You May Also Like: How to Edit YouTube Audio >>

---

Those of you reading this article as a guide to audio editing of videos on Final Cut Pro, needs to remember that this is just a basic tutorial for this professional editing software. However, if you are new to the field of video editing then you should consider using the Wondershare Filmora for Mac . It is a powerful but simple tool that is just the right editing software for beginners. The advanced tools of this software would even allow you to use a lot of special effects like picture in picture, tilt shifts, split-screen, and much more.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

How to edit audio on FCP

There are 2 ways of editing audio of videos on FCP-clip-level audio editing and advanced audio editing.

Section 1 Clip-level audio editing

While dragging the audio or video clip onto the timeline you have surely seen the level line right above the clip waveform. One can just drag the level line and move it up or down for adjusting the dB of any given clip.

The job of the tiny white points on the right and left side of the clip is to apply the fade in and fade out effect on the audio. The left sided point can be dragged to the right to mark the ending of the fade-in effect of the clip. The right point has to be dragged left to set the start of the fade-out point.

Related Article: How to fade in/out audio in Final Cut Pro >>

Note: In this level, any effects and adjustments in audio are applicable for the entire clip including the audio channels within it. All the adjustments in the individual audio channels made by you would be preserved by FCP. This implies that when one reduces the volume for just one channel but increases the volume of the entire clip, then the single channel’s volume is only raised in proportion to the volume of the other channels. Ideally, you should do your edits at the clip-level when you have only one or two audio channels on your video clip.

Section 2: Advanced Audio Editing

The audio of the video can be detached for editing the audio file separately. The Audio Inspector of FCP provides you with all precise controls of audio edit like pan, effect, volume, equalization and audio configuration.

In order to detach the audio, you need to go to Clip > Detach Audio. Or you can just right-click on the video file and click on Detach audio.

Note: There is a fine difference between ‘Detach Audio’ and ‘Expand Audio’. In Expand Audio, the audio clip is synced with the video. For instance, while moving the audio to the timeline, the video clip would also go with it. In case of detaching audio however the audio file would remain as a standalone clip that can be inserted into any portion of the video.

The Audio Inspector would allow you to apply the following effects:

• The volume can be increased by dragging the handle on the right side and lowered by dragging it towards the left.
• Audio Equalization would allow the user to apply various effects (bass, loudness, boost, etc.) on the audio clip. It can also be adjusted by using the in-built audio equalizer.

• Pan- Users can select from a number of Pan modes like surround sound or stereo. When you select ‘surround’, Final Cut Pro would provide you with a Surround Panner which would allow you to fine-tune the effects by moving the white point.

• Effects- for this option one needs to go to the effects browser of the Audio Inspector or just hit comd5. This would allow you to choose many different audio effects such as echo, distortion, spaces and much more. Just double-click on any effect to find a range of editing options.

• Audio Configuration: The audio configuration tool would allow the user to modify the audio channel with mono, stereo, or reverse stereo.

Here’s the video tutorial on how to edit audios in Final Cut Pro:

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

‘S Top Free MKV Splitters: No Watermarks or Trials

Top 10+ Best Free MKV Cutters

Ollie Mattison

Mar 27, 2024• Proven solutions

If you are having MKV files that do not meet your desired size, length, or quality, then you need to access editing tools. The tools come in handy when it comes to cutting videos into smaller fragments and eliminating unwanted movie or video clips. However, not all tools give good results because of their setup. Similarly, some are just too expensive. Fortunately, high-performing free cutters can be found on the internet and people should use them. Here are the Top 10+ Free MKV Cutters which will allow you to quickly cut the files without erasing, distorting, or causing harm to the original file. Check the video tutorial below to get a quick overview of the best free solutions to cut/split videos first.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

1. SolveigMM AVI Trimmer + MKV

This program is free software that will enable you to cut or rip apart video formats existing in AVI formats. SolveigMM AVI Trimmer + MKV is reliable because it maintains high quality with minimum distortion. What is more, the user interface is simply making all the tasks manageable. This way, you will manage to cut your video files within a few minutes without encountering any challenges. You can also upload your cut video on Youtube directly using this software.

2. Avidemux

Avidemux is not only a free video ripper but also a joining program. When using it, you should look for supported formats such as MKV, OGM, AVI, FLV, MP4 as well as MPG. It exhibits simplicity in its interface and people prefer this video cutting tool best. Similarly, you can use the software on other audio and video formats from the drag and drop menu located on the left side. The overall advantage of this tool is that it supports common tasks due to its simplicity.

3. Filmora MKV Cutter

The Filmora MKV cutter is an excellent tool for splitting big MKV files into smaller clips. Its interface is not complicated allowing it to be used by novices and professionals. It is satisfactory because you can cut the file to any size, length, and quality depending on your preferences. What is more, the quality of the video is amazing and you can also preset different parameters to the ideal settings to create a pleasant file output. It supports not just MKV files but also quite a wide range of other video formats. Royalty-free visual effects and a music library will surely save you a lot of time and effort in creating the best of your video. Check out the video below to get an instant overview of the stunning visual effects and music library:

Download a free copy to get started now:

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

5. Free Video Cutter Joiner

The program enables assists you to cut and then join videos in various formats such as MKV. You can easily separate and merge many files at a go to the intended size. Aside from ripping files, the software also detects the configuration and sets the parameters of the output to match that of the input. With such settings, you will access error-free files of high quality. In addition, you will experience high cutting speed and stability due to the easy-to-use interface. However, the program does not have an in-built video reader and the window size cannot be changed.

6. VSDC Free Video Editor

If you are looking for a video ripper that supports a variety of files, then VSDC Free Video Editor is the way to go. Aside from supporting MKV, it supports other files such as MPG, DAT, AVI, MOV, FLV, MP4 WMV, and DIVX. In this regard, you can cut different files fast and easily. It also comes with a video converter and is ideal for common tasks as long as you use high-level processors.

7. GilliSoft Video Editor

Unlike other cutters, GilliSoft Video Editor is more professional. It is relatively sophisticated but professionals handle it with ease. With its features, you can split videos into small clips and detect the functions internally. This way, you can be more accurate. You can also drag the files to the dashboard and add effects to the file and share them on Facebook, YouTube, and other mobile devices. Most importantly, you have full control over the editor and you can manipulate sound, time, and preview.

8. SolveigMM Video Splitter

SolveigMM Video cutter can split a range of formatted files in the name of MKV, WebM, FLV, AVI, MPEG, and M2TS. These are just some of the formats supported by the program and there are many more. The software cuts files according to quantity of files, size and time. Similarly, you can combine many files together and create a bigger file on the condition that the format is same. It is automatic, splits both audio and video files and is easy to use. Most importantly, it is accurate and there is no loss of quality.

9. Boilsoft Video Splitter

The program allows you to convert MKV formatted files to AVI and hardcore subtitle to the final videos. In addition, MP4 and AVI formats are applicable. MKV to AVI with subtitles has a simple GUI (Graphic User Interface) with a single screen. You must however install a CCCP codec for faster and more accurate performance.

10. Moo0 Video Cutter

Moo0 Video Cutter permits you to save your best movie clips in different videos and you will not lose quality or speed. You will split the videos within no time and maintain accuracy. Besides supporting MKV files, the program is able to support MP4, OGG, TP, OGV, MOV, WEBM, AVI, FLV and many more. The tool is user-friendly and can detect the problems internally maintaining stability. In addition, it is safe as your files will not be at risk of being exposed to viruses, spyware and malware.

10. Cute Video Cutter

Cute Video Cutter is a program whose capability enables you to split your videos into smaller fragments. You can also get rid of those parts that are not important to you. It can support many video formats including 3GP, RM, RMVB, DAT, VCD/DVD, VOB, and others. Keep in mind that using this tool will not tamper with the quality or arrangement of files. The interface is also straightforward and you will not encounter delays carrying out common tasks. Just define the starting and ending points to define what you need.

All of them are free MKV cutters, if you need powerful but easy-to-use MKV cutters, try Wondershare Filmora . Download the free trial version below.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

If you are having MKV files that do not meet your desired size, length, or quality, then you need to access editing tools. The tools come in handy when it comes to cutting videos into smaller fragments and eliminating unwanted movie or video clips. However, not all tools give good results because of their setup. Similarly, some are just too expensive. Fortunately, high-performing free cutters can be found on the internet and people should use them. Here are the Top 10+ Free MKV Cutters which will allow you to quickly cut the files without erasing, distorting, or causing harm to the original file. Check the video tutorial below to get a quick overview of the best free solutions to cut/split videos first.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

1. SolveigMM AVI Trimmer + MKV

This program is free software that will enable you to cut or rip apart video formats existing in AVI formats. SolveigMM AVI Trimmer + MKV is reliable because it maintains high quality with minimum distortion. What is more, the user interface is simply making all the tasks manageable. This way, you will manage to cut your video files within a few minutes without encountering any challenges. You can also upload your cut video on Youtube directly using this software.

2. Avidemux

Avidemux is not only a free video ripper but also a joining program. When using it, you should look for supported formats such as MKV, OGM, AVI, FLV, MP4 as well as MPG. It exhibits simplicity in its interface and people prefer this video cutting tool best. Similarly, you can use the software on other audio and video formats from the drag and drop menu located on the left side. The overall advantage of this tool is that it supports common tasks due to its simplicity.

3. Filmora MKV Cutter

The Filmora MKV cutter is an excellent tool for splitting big MKV files into smaller clips. Its interface is not complicated allowing it to be used by novices and professionals. It is satisfactory because you can cut the file to any size, length, and quality depending on your preferences. What is more, the quality of the video is amazing and you can also preset different parameters to the ideal settings to create a pleasant file output. It supports not just MKV files but also quite a wide range of other video formats. Royalty-free visual effects and a music library will surely save you a lot of time and effort in creating the best of your video. Check out the video below to get an instant overview of the stunning visual effects and music library:

Download a free copy to get started now:

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

5. Free Video Cutter Joiner

The program enables assists you to cut and then join videos in various formats such as MKV. You can easily separate and merge many files at a go to the intended size. Aside from ripping files, the software also detects the configuration and sets the parameters of the output to match that of the input. With such settings, you will access error-free files of high quality. In addition, you will experience high cutting speed and stability due to the easy-to-use interface. However, the program does not have an in-built video reader and the window size cannot be changed.

6. VSDC Free Video Editor

If you are looking for a video ripper that supports a variety of files, then VSDC Free Video Editor is the way to go. Aside from supporting MKV, it supports other files such as MPG, DAT, AVI, MOV, FLV, MP4 WMV, and DIVX. In this regard, you can cut different files fast and easily. It also comes with a video converter and is ideal for common tasks as long as you use high-level processors.

7. GilliSoft Video Editor

Unlike other cutters, GilliSoft Video Editor is more professional. It is relatively sophisticated but professionals handle it with ease. With its features, you can split videos into small clips and detect the functions internally. This way, you can be more accurate. You can also drag the files to the dashboard and add effects to the file and share them on Facebook, YouTube, and other mobile devices. Most importantly, you have full control over the editor and you can manipulate sound, time, and preview.

8. SolveigMM Video Splitter

SolveigMM Video cutter can split a range of formatted files in the name of MKV, WebM, FLV, AVI, MPEG, and M2TS. These are just some of the formats supported by the program and there are many more. The software cuts files according to quantity of files, size and time. Similarly, you can combine many files together and create a bigger file on the condition that the format is same. It is automatic, splits both audio and video files and is easy to use. Most importantly, it is accurate and there is no loss of quality.

9. Boilsoft Video Splitter

The program allows you to convert MKV formatted files to AVI and hardcore subtitle to the final videos. In addition, MP4 and AVI formats are applicable. MKV to AVI with subtitles has a simple GUI (Graphic User Interface) with a single screen. You must however install a CCCP codec for faster and more accurate performance.

10. Moo0 Video Cutter

Moo0 Video Cutter permits you to save your best movie clips in different videos and you will not lose quality or speed. You will split the videos within no time and maintain accuracy. Besides supporting MKV files, the program is able to support MP4, OGG, TP, OGV, MOV, WEBM, AVI, FLV and many more. The tool is user-friendly and can detect the problems internally maintaining stability. In addition, it is safe as your files will not be at risk of being exposed to viruses, spyware and malware.

10. Cute Video Cutter

Cute Video Cutter is a program whose capability enables you to split your videos into smaller fragments. You can also get rid of those parts that are not important to you. It can support many video formats including 3GP, RM, RMVB, DAT, VCD/DVD, VOB, and others. Keep in mind that using this tool will not tamper with the quality or arrangement of files. The interface is also straightforward and you will not encounter delays carrying out common tasks. Just define the starting and ending points to define what you need.

All of them are free MKV cutters, if you need powerful but easy-to-use MKV cutters, try Wondershare Filmora . Download the free trial version below.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

If you are having MKV files that do not meet your desired size, length, or quality, then you need to access editing tools. The tools come in handy when it comes to cutting videos into smaller fragments and eliminating unwanted movie or video clips. However, not all tools give good results because of their setup. Similarly, some are just too expensive. Fortunately, high-performing free cutters can be found on the internet and people should use them. Here are the Top 10+ Free MKV Cutters which will allow you to quickly cut the files without erasing, distorting, or causing harm to the original file. Check the video tutorial below to get a quick overview of the best free solutions to cut/split videos first.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

1. SolveigMM AVI Trimmer + MKV

This program is free software that will enable you to cut or rip apart video formats existing in AVI formats. SolveigMM AVI Trimmer + MKV is reliable because it maintains high quality with minimum distortion. What is more, the user interface is simply making all the tasks manageable. This way, you will manage to cut your video files within a few minutes without encountering any challenges. You can also upload your cut video on Youtube directly using this software.

2. Avidemux

Avidemux is not only a free video ripper but also a joining program. When using it, you should look for supported formats such as MKV, OGM, AVI, FLV, MP4 as well as MPG. It exhibits simplicity in its interface and people prefer this video cutting tool best. Similarly, you can use the software on other audio and video formats from the drag and drop menu located on the left side. The overall advantage of this tool is that it supports common tasks due to its simplicity.

3. Filmora MKV Cutter

The Filmora MKV cutter is an excellent tool for splitting big MKV files into smaller clips. Its interface is not complicated allowing it to be used by novices and professionals. It is satisfactory because you can cut the file to any size, length, and quality depending on your preferences. What is more, the quality of the video is amazing and you can also preset different parameters to the ideal settings to create a pleasant file output. It supports not just MKV files but also quite a wide range of other video formats. Royalty-free visual effects and a music library will surely save you a lot of time and effort in creating the best of your video. Check out the video below to get an instant overview of the stunning visual effects and music library:

Download a free copy to get started now:

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

5. Free Video Cutter Joiner

The program enables assists you to cut and then join videos in various formats such as MKV. You can easily separate and merge many files at a go to the intended size. Aside from ripping files, the software also detects the configuration and sets the parameters of the output to match that of the input. With such settings, you will access error-free files of high quality. In addition, you will experience high cutting speed and stability due to the easy-to-use interface. However, the program does not have an in-built video reader and the window size cannot be changed.

6. VSDC Free Video Editor

If you are looking for a video ripper that supports a variety of files, then VSDC Free Video Editor is the way to go. Aside from supporting MKV, it supports other files such as MPG, DAT, AVI, MOV, FLV, MP4 WMV, and DIVX. In this regard, you can cut different files fast and easily. It also comes with a video converter and is ideal for common tasks as long as you use high-level processors.

7. GilliSoft Video Editor

Unlike other cutters, GilliSoft Video Editor is more professional. It is relatively sophisticated but professionals handle it with ease. With its features, you can split videos into small clips and detect the functions internally. This way, you can be more accurate. You can also drag the files to the dashboard and add effects to the file and share them on Facebook, YouTube, and other mobile devices. Most importantly, you have full control over the editor and you can manipulate sound, time, and preview.

8. SolveigMM Video Splitter

SolveigMM Video cutter can split a range of formatted files in the name of MKV, WebM, FLV, AVI, MPEG, and M2TS. These are just some of the formats supported by the program and there are many more. The software cuts files according to quantity of files, size and time. Similarly, you can combine many files together and create a bigger file on the condition that the format is same. It is automatic, splits both audio and video files and is easy to use. Most importantly, it is accurate and there is no loss of quality.

9. Boilsoft Video Splitter

The program allows you to convert MKV formatted files to AVI and hardcore subtitle to the final videos. In addition, MP4 and AVI formats are applicable. MKV to AVI with subtitles has a simple GUI (Graphic User Interface) with a single screen. You must however install a CCCP codec for faster and more accurate performance.

10. Moo0 Video Cutter

Moo0 Video Cutter permits you to save your best movie clips in different videos and you will not lose quality or speed. You will split the videos within no time and maintain accuracy. Besides supporting MKV files, the program is able to support MP4, OGG, TP, OGV, MOV, WEBM, AVI, FLV and many more. The tool is user-friendly and can detect the problems internally maintaining stability. In addition, it is safe as your files will not be at risk of being exposed to viruses, spyware and malware.

10. Cute Video Cutter

Cute Video Cutter is a program whose capability enables you to split your videos into smaller fragments. You can also get rid of those parts that are not important to you. It can support many video formats including 3GP, RM, RMVB, DAT, VCD/DVD, VOB, and others. Keep in mind that using this tool will not tamper with the quality or arrangement of files. The interface is also straightforward and you will not encounter delays carrying out common tasks. Just define the starting and ending points to define what you need.

All of them are free MKV cutters, if you need powerful but easy-to-use MKV cutters, try Wondershare Filmora . Download the free trial version below.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Ollie Mattison

Mar 27, 2024• Proven solutions

If you are having MKV files that do not meet your desired size, length, or quality, then you need to access editing tools. The tools come in handy when it comes to cutting videos into smaller fragments and eliminating unwanted movie or video clips. However, not all tools give good results because of their setup. Similarly, some are just too expensive. Fortunately, high-performing free cutters can be found on the internet and people should use them. Here are the Top 10+ Free MKV Cutters which will allow you to quickly cut the files without erasing, distorting, or causing harm to the original file. Check the video tutorial below to get a quick overview of the best free solutions to cut/split videos first.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

1. SolveigMM AVI Trimmer + MKV

This program is free software that will enable you to cut or rip apart video formats existing in AVI formats. SolveigMM AVI Trimmer + MKV is reliable because it maintains high quality with minimum distortion. What is more, the user interface is simply making all the tasks manageable. This way, you will manage to cut your video files within a few minutes without encountering any challenges. You can also upload your cut video on Youtube directly using this software.

2. Avidemux

Avidemux is not only a free video ripper but also a joining program. When using it, you should look for supported formats such as MKV, OGM, AVI, FLV, MP4 as well as MPG. It exhibits simplicity in its interface and people prefer this video cutting tool best. Similarly, you can use the software on other audio and video formats from the drag and drop menu located on the left side. The overall advantage of this tool is that it supports common tasks due to its simplicity.

3. Filmora MKV Cutter

The Filmora MKV cutter is an excellent tool for splitting big MKV files into smaller clips. Its interface is not complicated allowing it to be used by novices and professionals. It is satisfactory because you can cut the file to any size, length, and quality depending on your preferences. What is more, the quality of the video is amazing and you can also preset different parameters to the ideal settings to create a pleasant file output. It supports not just MKV files but also quite a wide range of other video formats. Royalty-free visual effects and a music library will surely save you a lot of time and effort in creating the best of your video. Check out the video below to get an instant overview of the stunning visual effects and music library:

Download a free copy to get started now:

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

5. Free Video Cutter Joiner

The program enables assists you to cut and then join videos in various formats such as MKV. You can easily separate and merge many files at a go to the intended size. Aside from ripping files, the software also detects the configuration and sets the parameters of the output to match that of the input. With such settings, you will access error-free files of high quality. In addition, you will experience high cutting speed and stability due to the easy-to-use interface. However, the program does not have an in-built video reader and the window size cannot be changed.

6. VSDC Free Video Editor

If you are looking for a video ripper that supports a variety of files, then VSDC Free Video Editor is the way to go. Aside from supporting MKV, it supports other files such as MPG, DAT, AVI, MOV, FLV, MP4 WMV, and DIVX. In this regard, you can cut different files fast and easily. It also comes with a video converter and is ideal for common tasks as long as you use high-level processors.

7. GilliSoft Video Editor

Unlike other cutters, GilliSoft Video Editor is more professional. It is relatively sophisticated but professionals handle it with ease. With its features, you can split videos into small clips and detect the functions internally. This way, you can be more accurate. You can also drag the files to the dashboard and add effects to the file and share them on Facebook, YouTube, and other mobile devices. Most importantly, you have full control over the editor and you can manipulate sound, time, and preview.

8. SolveigMM Video Splitter

SolveigMM Video cutter can split a range of formatted files in the name of MKV, WebM, FLV, AVI, MPEG, and M2TS. These are just some of the formats supported by the program and there are many more. The software cuts files according to quantity of files, size and time. Similarly, you can combine many files together and create a bigger file on the condition that the format is same. It is automatic, splits both audio and video files and is easy to use. Most importantly, it is accurate and there is no loss of quality.

9. Boilsoft Video Splitter

The program allows you to convert MKV formatted files to AVI and hardcore subtitle to the final videos. In addition, MP4 and AVI formats are applicable. MKV to AVI with subtitles has a simple GUI (Graphic User Interface) with a single screen. You must however install a CCCP codec for faster and more accurate performance.

10. Moo0 Video Cutter

Moo0 Video Cutter permits you to save your best movie clips in different videos and you will not lose quality or speed. You will split the videos within no time and maintain accuracy. Besides supporting MKV files, the program is able to support MP4, OGG, TP, OGV, MOV, WEBM, AVI, FLV and many more. The tool is user-friendly and can detect the problems internally maintaining stability. In addition, it is safe as your files will not be at risk of being exposed to viruses, spyware and malware.

10. Cute Video Cutter

Cute Video Cutter is a program whose capability enables you to split your videos into smaller fragments. You can also get rid of those parts that are not important to you. It can support many video formats including 3GP, RM, RMVB, DAT, VCD/DVD, VOB, and others. Keep in mind that using this tool will not tamper with the quality or arrangement of files. The interface is also straightforward and you will not encounter delays carrying out common tasks. Just define the starting and ending points to define what you need.

All of them are free MKV cutters, if you need powerful but easy-to-use MKV cutters, try Wondershare Filmora . Download the free trial version below.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Ollie Mattison

Ollie Mattison is a writer and a lover of all things video.

Follow @Ollie Mattison

Beyond Movie Maker: 10 Free Video Editors for Windows Users

We all know what a windows movie maker is, and this is one of the best editing programs for beginners. This program was pre-installed in almost all window devices, and people started preferring this program as it comes with a simple interface, additional special effects for fun, and mainly this is free. One question that was asked by almost all the windows users was whether windows movie maker free.

However, in 2017 Microsoft stopped supporting and helping Windows movie makers. They also warned the users that downloading this movie maker from any 3rd party can contain viruses, hidden costs, and malware. Now it has become difficult to use windows free movie makers. If you are a beginner and searching for a great windows movie maker alternative, stick to this blog.

1. Filmora

If you are not new to this editing field, you must have heard the name Filmora . It is one of the best editing software available in the market. It is a line of editing applications and video creation and contains various products for intermediate and beginners. A few standard features of Filmora include a preview window, effects library, timeline, etc. The software library is developed to be compatible with both macOS and Windows.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

You can use the free demo feature before purchasing the original product, and you might get to see a few types.

• Filmora is a simple video editor with preset effects and video templates.
• FilmoraPro is a premium and better version with better industry-standard features, including keyframe-based animation, customizable effects, and color grading.
• Filmora is a version available for mobile devices.
• FilmoraScrn is available only for windows, a screen recording app with additional features.

Pros

• Great intermediate and basic features
• Simple user-interface
• Offers screen recording
• Offers a sound support system

Cons

• Lack of advanced features
• Contains watermark

2. VSDC Free Video Editor

If you plan to edit your videos with some great tools, then you need a VSDC-free video editor. As this video editor doesn’t charge anything, you don’t have to worry about payment, subscription, and trial period. With the help of this application, the developers are successfully building a strong community, which will help you understand troubleshoot issues and features of the program.

This video editor can perform various functions, including adding effects, reducing file size, a wide range of formats, etc. VSDC can also convert the files to a compatible format. The program offers different devices, including Blackberry, iPod, Xbox, iRiver, iPhone, etc. You can easily extract audio, add markers, export individual images, and perform many more functions efficiently.

Pros

• Simple interface
• DVD burning features
• Non-linear editing

Cons

• Common video editing features
• Lack of additional editing features

3. VideoPad

Videopad is also free editing software that allows its users to edit videos and perform various tasks related to the editing industry. With the help of this movie maker program, you can easily create a great video and perform a few basic editing tasks. If you create videos very often for social media platforms or your friends and family, then Videopad is what you need.

Though this video maker doesn’t have advanced features, its basic video editing skills are enough to create a blasting video. The simple interface of the editing platform helps the users understand the process in a simple way. This platform can be termed as one of the best free windows movie makers.

Pros

• Best free video editing application for the beginners
• Supports various video formats
• 360-degree editing
• New updates daily

Cons

• Doesn’t support video animation
• No collaboration tools or video capturing

4. Shotcut Video Editor

Shortcut is also a free editing software, available for Windows, Linux, and Mac. This application is best for the people who would prefer not to be dependent on giant software corporations but would undergo the regular upgrade of the community of dedicated and enthusiastic developers. This video editor is feature-packed, helpful, and one of the best free video editors. Moreover, if you are new to the editing industry, this application is perfect.

This application will allow you to edit and create various audio and visual editing functionalities. This app is the perfect alternative for beginners with an engaged and active community. Also, you can also go through the tutorials if you are facing any issues. This popular multimedia store is a perfect alternative for many expensive and complicated tools like OpenShot, Lightwork, etc.

Pros

• Free to use
• Consists of advanced tools and effects
• High-quality export/input support

Cons

• No preview for transition and effect
• No stock music

5. OpenShot Video Editor

Cross-platform video editing software is designed to help various businesses utilize the drag and drop interface feature to edit videos, audios, or images. Users can use this video editing software to add animation effects such as flying text, fade, bounce, snow, watermarks, audio track, 3D titles, etc. This app is perfect for the beginner as it has many valuable features, and this software costs no money.

This software is very easy to use and is helping various professionals all around the world with its excellent features. This website is great for both professionals and beginners; moreover, the developers are working on the system to bring up the latest version of the video editing software.

Pros

• 3D title
• Free to use
• No watermark
• Update for reducing the bugs

Cons

• Limited editing tools
• Obsolete interface
• Unstable performance

6. Ezvid

This one is known for its power of cutting-edge features and effects. With facecam, voice synthesis, speed control, and screen drawing, Ezvid is the only best solution to make videos entertaining, enchanting, and informing your viewers. With a single click, you can record the screen using the Ezvid windows version and capture everything that appears on the computer screen; games, applications, paint programs, etc.

The software’s revolutionary and elegant screen drawing functionality allows you to paint or draw directly on your screen; moreover, you can develop amazing screencasts and documents with an easy process. This software is also the best and the easiest screen recorder and screen capture program for windows. More than 3 million people have already downloaded the app.

Pros

• Offer quality and high resolution to record videos
• An intuitive and simple interface for beginners
• Power of controlling the speed of recording

Cons

• Limitation of recording timing
• Unable to download and save videos

7. Avidemux

Avidemux is one of the best alternatives to free video editing software. This video editor is specially designed for simple cutting, encoding tasks, and filtering. It supports various files like DVD-compatible MPEG files, AVI, ASF, and MP4, using many codecs. You can also automate the task using a job queue, powerful scripting capabilities, and projects.

This software is available for macOS X, Windows, Linux, etc. You can use various tools to sync audio tracks or compress videos. Avidemux is an easy video editing software that comes with various useful functions. Users can use this software to cut or edit videos, encode exports, add subtitles, etc. Anyone can use it; it is the best software for editing social media websites and commercial ads.

Pros

• Store custom script
• Add subtitles to your video
• Encode your video

Cons

• Complex process
• Confusing cutting features

8. Microsoft Photos

Microsoft photos allow you to edit and view your videos and photos, create an album, make movies, etc. You have various effective creative tools at your fingertips, such as video remix for the instant creation of a video from various pictures or videos, rotating and crop photos, adding a filter and a few other effects, and adjusting lighting and color. It also allows you to add different 3D effects like laser, butterfly, explosion, etc.

This application has no difficulty, and anyone can use it without facing any trouble; all you need to do is watch the tutorial if you are facing any trouble during the process. This app is best for editing and trimming videos for YouTube. Microsoft Photos: free movie maker windows.

Pros

• User-friendly interface
• Easy to access
• Bunch of basic features

Cons

• Lack of advanced features
• Lag in the software

9. FilmForth

FilmForth is a software that consists of all the video editing features that allow the user to edit video without any skills. You can also save a video without a watermark and share it on any platform. The best thing about this application is that you can access all the features without paying anything.

Whether you want to edit a video or a picture, FilmForth understands what you want, so they act accordingly and help you get the same video or image in just a few clicks. The main motive of this software is to reduce the complication during video editing. You can perform various tasks like adding logos, making a slideshow, removing or changing background, etc.

Pros

• Can share the media on any platform
• Allows you to download without any watermark
• Allows you to use the features without purchasing any package

Cons

• Not a great user-interface
• Lag in the system

10. VirtualDub

VirtualDub is a processing utility and video capture licensed under the General Public license. It is designed in a way so that it can clean and trim the video before processing with another program or exporting to tape. It doesn’t have the features close to Adobe premiere but is comparatively faster than all those software.

This software can also process many files because of its batch-processing capabilities. Just like all other applications, it has its benefits, and you can use them to benefit yourself in many ways. It has a fractional frame rate, so you don’t have to settle for 29 anymore. They also offer mouse and keyboard shortcuts for easy and fast operation.

Pros

• Integrated volume meter
• Access to hidden video format
• Noise reduction

Cons

• Slow process
• Poor interface

Conclusion

Many people come up with the question, is windows movie maker free; yes, it is free, and anyone can use it. We also have shared some alternate solutions to the video editing process. You can use one as per your need and requirement.

Free Download For macOS 10.14 or later

You can use the free demo feature before purchasing the original product, and you might get to see a few types.

• Filmora is a simple video editor with preset effects and video templates.
• FilmoraPro is a premium and better version with better industry-standard features, including keyframe-based animation, customizable effects, and color grading.
• Filmora is a version available for mobile devices.
• FilmoraScrn is available only for windows, a screen recording app with additional features.

Pros

• Great intermediate and basic features
• Simple user-interface
• Offers screen recording
• Offers a sound support system

Cons

• Lack of advanced features
• Contains watermark

2. VSDC Free Video Editor

If you plan to edit your videos with some great tools, then you need a VSDC-free video editor. As this video editor doesn’t charge anything, you don’t have to worry about payment, subscription, and trial period. With the help of this application, the developers are successfully building a strong community, which will help you understand troubleshoot issues and features of the program.

This video editor can perform various functions, including adding effects, reducing file size, a wide range of formats, etc. VSDC can also convert the files to a compatible format. The program offers different devices, including Blackberry, iPod, Xbox, iRiver, iPhone, etc. You can easily extract audio, add markers, export individual images, and perform many more functions efficiently.

Pros

• Simple interface
• DVD burning features
• Non-linear editing

Cons

• Common video editing features
• Lack of additional editing features

3. VideoPad

Videopad is also free editing software that allows its users to edit videos and perform various tasks related to the editing industry. With the help of this movie maker program, you can easily create a great video and perform a few basic editing tasks. If you create videos very often for social media platforms or your friends and family, then Videopad is what you need.

Though this video maker doesn’t have advanced features, its basic video editing skills are enough to create a blasting video. The simple interface of the editing platform helps the users understand the process in a simple way. This platform can be termed as one of the best free windows movie makers.

Pros

• Best free video editing application for the beginners
• Supports various video formats
• 360-degree editing
• New updates daily

Cons

• Doesn’t support video animation
• No collaboration tools or video capturing

4. Shotcut Video Editor

Shortcut is also a free editing software, available for Windows, Linux, and Mac. This application is best for the people who would prefer not to be dependent on giant software corporations but would undergo the regular upgrade of the community of dedicated and enthusiastic developers. This video editor is feature-packed, helpful, and one of the best free video editors. Moreover, if you are new to the editing industry, this application is perfect.

This application will allow you to edit and create various audio and visual editing functionalities. This app is the perfect alternative for beginners with an engaged and active community. Also, you can also go through the tutorials if you are facing any issues. This popular multimedia store is a perfect alternative for many expensive and complicated tools like OpenShot, Lightwork, etc.

Pros

• Free to use
• Consists of advanced tools and effects
• High-quality export/input support

Cons

• No preview for transition and effect
• No stock music

5. OpenShot Video Editor

Cross-platform video editing software is designed to help various businesses utilize the drag and drop interface feature to edit videos, audios, or images. Users can use this video editing software to add animation effects such as flying text, fade, bounce, snow, watermarks, audio track, 3D titles, etc. This app is perfect for the beginner as it has many valuable features, and this software costs no money.

This software is very easy to use and is helping various professionals all around the world with its excellent features. This website is great for both professionals and beginners; moreover, the developers are working on the system to bring up the latest version of the video editing software.

Pros

• 3D title
• Free to use
• No watermark
• Update for reducing the bugs

Cons

• Limited editing tools
• Obsolete interface
• Unstable performance

6. Ezvid

This one is known for its power of cutting-edge features and effects. With facecam, voice synthesis, speed control, and screen drawing, Ezvid is the only best solution to make videos entertaining, enchanting, and informing your viewers. With a single click, you can record the screen using the Ezvid windows version and capture everything that appears on the computer screen; games, applications, paint programs, etc.

The software’s revolutionary and elegant screen drawing functionality allows you to paint or draw directly on your screen; moreover, you can develop amazing screencasts and documents with an easy process. This software is also the best and the easiest screen recorder and screen capture program for windows. More than 3 million people have already downloaded the app.

Pros

• Offer quality and high resolution to record videos
• An intuitive and simple interface for beginners
• Power of controlling the speed of recording

Cons

• Limitation of recording timing
• Unable to download and save videos

7. Avidemux

Avidemux is one of the best alternatives to free video editing software. This video editor is specially designed for simple cutting, encoding tasks, and filtering. It supports various files like DVD-compatible MPEG files, AVI, ASF, and MP4, using many codecs. You can also automate the task using a job queue, powerful scripting capabilities, and projects.

This software is available for macOS X, Windows, Linux, etc. You can use various tools to sync audio tracks or compress videos. Avidemux is an easy video editing software that comes with various useful functions. Users can use this software to cut or edit videos, encode exports, add subtitles, etc. Anyone can use it; it is the best software for editing social media websites and commercial ads.

Pros

• Store custom script
• Add subtitles to your video
• Encode your video

Cons

• Complex process
• Confusing cutting features

8. Microsoft Photos

Microsoft photos allow you to edit and view your videos and photos, create an album, make movies, etc. You have various effective creative tools at your fingertips, such as video remix for the instant creation of a video from various pictures or videos, rotating and crop photos, adding a filter and a few other effects, and adjusting lighting and color. It also allows you to add different 3D effects like laser, butterfly, explosion, etc.

This application has no difficulty, and anyone can use it without facing any trouble; all you need to do is watch the tutorial if you are facing any trouble during the process. This app is best for editing and trimming videos for YouTube. Microsoft Photos: free movie maker windows.

Pros

• User-friendly interface
• Easy to access
• Bunch of basic features

Cons

• Lack of advanced features
• Lag in the software

9. FilmForth

FilmForth is a software that consists of all the video editing features that allow the user to edit video without any skills. You can also save a video without a watermark and share it on any platform. The best thing about this application is that you can access all the features without paying anything.

Whether you want to edit a video or a picture, FilmForth understands what you want, so they act accordingly and help you get the same video or image in just a few clicks. The main motive of this software is to reduce the complication during video editing. You can perform various tasks like adding logos, making a slideshow, removing or changing background, etc.

Pros

• Can share the media on any platform
• Allows you to download without any watermark
• Allows you to use the features without purchasing any package

Cons

• Not a great user-interface
• Lag in the system

10. VirtualDub

VirtualDub is a processing utility and video capture licensed under the General Public license. It is designed in a way so that it can clean and trim the video before processing with another program or exporting to tape. It doesn’t have the features close to Adobe premiere but is comparatively faster than all those software.

This software can also process many files because of its batch-processing capabilities. Just like all other applications, it has its benefits, and you can use them to benefit yourself in many ways. It has a fractional frame rate, so you don’t have to settle for 29 anymore. They also offer mouse and keyboard shortcuts for easy and fast operation.

Pros

• Integrated volume meter
• Access to hidden video format
• Noise reduction

Cons

• Slow process
• Poor interface

Conclusion

Many people come up with the question, is windows movie maker free; yes, it is free, and anyone can use it. We also have shared some alternate solutions to the video editing process. You can use one as per your need and requirement.

Elevate Your Storytelling: Easy Video Creation with Ezvid on Mac

Ezvid for Mac: Create Slideshows and Home Videos Easily in Mac OS

Liza Brown

Mar 27, 2024• Proven solutions

Ezvid is a simple and fast video maker for Windows users to create and share videos directly to YouTube. Designed for both professional and amateur users, it can help you create amazing slideshows and home movies in minutes instead of hours.

If you get used to Ezvid, and just moved to a Mac, you might wonder if Ezvid also comes with a Mac version. Unfortunately, Ezvid does not support Mac and as a result, you have to find a video program that is similar to Ezivd. If this is your case, give Wondershare Filmora (originally Wondershare Video Editor) for Mac a try. It can function as a powerful Ezivd for Mac by users of all ages.

Check the video tutorial about how to edit videos on Mac first.

1. Intuitive interface and precise video editing

Wondershare Filmora is a photo video maker for Mac features a stylish interface and handy editing tools.

It provides a media browser for you to import all your local video, audio, or still images conveniently. Only by drag-and-drop, you can arrange and organize the videos for easy editing.

All video editing is based on Timeline, which lets you edit the video & audio comfortably. Also, it provides a side-by-side previewing window. What you see is what you get.

2. Enhance your video instantly in Mac

Besides all common editing tools like crop, rotate, trim, split, add voiceover and background music, Ezivd for Mac also enables you to touch up videos by an extensive list of fabulous video edits.

For example, you can apply Mosaic to hide personal or copyrighted info, create a close-up to stand out from the crowd, adjust the playing speed like 2x faster to make fun. Let alone picking up your favorite effects from rich transitions, visual filters, intros/credits, texts, sounds, and more.

3. Share the finished video with the worldwide

When you finish video editing, there are a variety of options available to export your creation. Like Ezvid, you can easily upload your masterpiece to YouTube directly from this Ezvid alternative, as well as a message to Facebook and Twitter. Or save it on the computer in all SD and HD formats like AVI, WMV, MOV, MKV, and so on.

More often, you’ll choose to play on portable devices like iPad, iPhone, Samsung Galaxy SIII, etc. Even burning DVD or DVD folders is included in this software for permanent preservation.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Ezvid is a simple and fast video maker for Windows users to create and share videos directly to YouTube. Designed for both professional and amateur users, it can help you create amazing slideshows and home movies in minutes instead of hours.

If you get used to Ezvid, and just moved to a Mac, you might wonder if Ezvid also comes with a Mac version. Unfortunately, Ezvid does not support Mac and as a result, you have to find a video program that is similar to Ezivd. If this is your case, give Wondershare Filmora (originally Wondershare Video Editor) for Mac a try. It can function as a powerful Ezivd for Mac by users of all ages.

Check the video tutorial about how to edit videos on Mac first.

1. Intuitive interface and precise video editing

Wondershare Filmora is a photo video maker for Mac features a stylish interface and handy editing tools.

It provides a media browser for you to import all your local video, audio, or still images conveniently. Only by drag-and-drop, you can arrange and organize the videos for easy editing.

All video editing is based on Timeline, which lets you edit the video & audio comfortably. Also, it provides a side-by-side previewing window. What you see is what you get.

2. Enhance your video instantly in Mac

Besides all common editing tools like crop, rotate, trim, split, add voiceover and background music, Ezivd for Mac also enables you to touch up videos by an extensive list of fabulous video edits.

For example, you can apply Mosaic to hide personal or copyrighted info, create a close-up to stand out from the crowd, adjust the playing speed like 2x faster to make fun. Let alone picking up your favorite effects from rich transitions, visual filters, intros/credits, texts, sounds, and more.

3. Share the finished video with the worldwide

When you finish video editing, there are a variety of options available to export your creation. Like Ezvid, you can easily upload your masterpiece to YouTube directly from this Ezvid alternative, as well as a message to Facebook and Twitter. Or save it on the computer in all SD and HD formats like AVI, WMV, MOV, MKV, and so on.

More often, you’ll choose to play on portable devices like iPad, iPhone, Samsung Galaxy SIII, etc. Even burning DVD or DVD folders is included in this software for permanent preservation.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Ezvid is a simple and fast video maker for Windows users to create and share videos directly to YouTube. Designed for both professional and amateur users, it can help you create amazing slideshows and home movies in minutes instead of hours.

If you get used to Ezvid, and just moved to a Mac, you might wonder if Ezvid also comes with a Mac version. Unfortunately, Ezvid does not support Mac and as a result, you have to find a video program that is similar to Ezivd. If this is your case, give Wondershare Filmora (originally Wondershare Video Editor) for Mac a try. It can function as a powerful Ezivd for Mac by users of all ages.

Check the video tutorial about how to edit videos on Mac first.

1. Intuitive interface and precise video editing

Wondershare Filmora is a photo video maker for Mac features a stylish interface and handy editing tools.

It provides a media browser for you to import all your local video, audio, or still images conveniently. Only by drag-and-drop, you can arrange and organize the videos for easy editing.

All video editing is based on Timeline, which lets you edit the video & audio comfortably. Also, it provides a side-by-side previewing window. What you see is what you get.

2. Enhance your video instantly in Mac

Besides all common editing tools like crop, rotate, trim, split, add voiceover and background music, Ezivd for Mac also enables you to touch up videos by an extensive list of fabulous video edits.

For example, you can apply Mosaic to hide personal or copyrighted info, create a close-up to stand out from the crowd, adjust the playing speed like 2x faster to make fun. Let alone picking up your favorite effects from rich transitions, visual filters, intros/credits, texts, sounds, and more.

3. Share the finished video with the worldwide

When you finish video editing, there are a variety of options available to export your creation. Like Ezvid, you can easily upload your masterpiece to YouTube directly from this Ezvid alternative, as well as a message to Facebook and Twitter. Or save it on the computer in all SD and HD formats like AVI, WMV, MOV, MKV, and so on.

More often, you’ll choose to play on portable devices like iPad, iPhone, Samsung Galaxy SIII, etc. Even burning DVD or DVD folders is included in this software for permanent preservation.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Ezvid is a simple and fast video maker for Windows users to create and share videos directly to YouTube. Designed for both professional and amateur users, it can help you create amazing slideshows and home movies in minutes instead of hours.

If you get used to Ezvid, and just moved to a Mac, you might wonder if Ezvid also comes with a Mac version. Unfortunately, Ezvid does not support Mac and as a result, you have to find a video program that is similar to Ezivd. If this is your case, give Wondershare Filmora (originally Wondershare Video Editor) for Mac a try. It can function as a powerful Ezivd for Mac by users of all ages.

Check the video tutorial about how to edit videos on Mac first.

1. Intuitive interface and precise video editing

Wondershare Filmora is a photo video maker for Mac features a stylish interface and handy editing tools.

It provides a media browser for you to import all your local video, audio, or still images conveniently. Only by drag-and-drop, you can arrange and organize the videos for easy editing.

All video editing is based on Timeline, which lets you edit the video & audio comfortably. Also, it provides a side-by-side previewing window. What you see is what you get.

2. Enhance your video instantly in Mac

Besides all common editing tools like crop, rotate, trim, split, add voiceover and background music, Ezivd for Mac also enables you to touch up videos by an extensive list of fabulous video edits.

For example, you can apply Mosaic to hide personal or copyrighted info, create a close-up to stand out from the crowd, adjust the playing speed like 2x faster to make fun. Let alone picking up your favorite effects from rich transitions, visual filters, intros/credits, texts, sounds, and more.

3. Share the finished video with the worldwide

When you finish video editing, there are a variety of options available to export your creation. Like Ezvid, you can easily upload your masterpiece to YouTube directly from this Ezvid alternative, as well as a message to Facebook and Twitter. Or save it on the computer in all SD and HD formats like AVI, WMV, MOV, MKV, and so on.

More often, you’ll choose to play on portable devices like iPad, iPhone, Samsung Galaxy SIII, etc. Even burning DVD or DVD folders is included in this software for permanent preservation.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Also read: