Follow the Simple Steps Below to Flip, Crop, Resize or Move Clips with Final Cut Pro

4 Detailed Steps to Flip a Clip in Final Cut Pro

Benjamin Arango

Mar 27, 2024• Proven solutions

The Final Cut Pro is a video editing software on Mac Computer that offers a wide range of photo and video orientation options that can help you make your video and photo the way you would want it to appear. If you have vertically filmed a video on your mobile phone and you want to twist it up, down, or place it at any angle without changing its quality, this would be the best tool for you. Flipping clips in the Final Cut Pro by following the steps below.

The video below shows how simple it is to flip video in Final Cut Pro.

If you want to rotate and flip video clips on your Mac for free, you can also try iMovie. Check our guide about How to rotate and flip videos in iMovie.

How to Flip a Clip in Final Cut Pro

As one of the most popular professional video editing software, Final Cut Pro is an easy-to-use software that can enable you to fully customize your videos by flipping, rotating and doing all sorts of editing tasks. Follow the below simple steps to flip, crop, resize or move clips.

Step 1: Select a Clip on the Timeline

The timeline is at the bottom portion of the Final Cut Pro. After adding clips to the timeline, you can add tittles and texts as well to these clips before integrating them into your videos.

Step 2: Access the Transform Option

There is a popup menu for you to get the Transform tool. It is in the lower-left corner of the viewer so it should be easy to see. You can use the shortcut as well which can be done by pressing (shift-T). Or Control-click in the viewer and choose Transform.

Step 3: Rotate and Re-size Video Clips

You can now do the following steps to rotate the video clip and change the size as well:

There are blue handles at each corner which enable the user to adjust image size while maintaining the aspect ratio of the photo.

Blue handles in the middle of each side are used to adjust horizontal and vertical image sizes changing the aspect ratio of the clips.

The center circle indicates the rotation anchor points that enable the changing of the image position. Drag the blue handle protruding from the circle to rotate the image.

Step 4: Flipping video clips

Click the video clips that you want to flip in the timeline and make sure it is highlighted and then click the Inspector icon on the right side to enter the Inspector panel in which you will then see the Transform option.

The positions X and Y enable you to move the image left and right as well as moving it from top to bottom depending on how you want it to be.
The Rotation point allows you to rotate the image around its anchor points.
The Scale option is for resizing the image. Click the small arrow alongside it and then you will see X and Y options. To flip the video clip, just enter-1oo in the X sidebar and press the Enter key. You will see then the selected clip in the timeline will be flipped horizontally to another direction. Enter -100 in the Y sidebar and then the clip will be flipped vertically, namely, upside-down direction.
The Anchor X and Y allows you to Move the image’s center point.

An Easier Way to Flip a Clip in Final Cut Pro Alternative

If you’d like an easier way to filp a clip, Wondershare Filmora will be the best choice. As an easy to use video editor, Wondershare Filmora has also amazed the users by its feature of flipping the clip. You can easily flip the clip in clockwise, anti-clockwise, horizontal or vertical directions. There are many effects and features available in Wondershare Filmora that you can apply in your video.

Features:

Allow removing the background noise
Editing videos and export in multiple formats
Changing the background and adding the special effects to it
Adjusting the white balance in the clips

Flipping the clips more easily in Wondershare Filmora:

Step1: Importing the original video clip:

After the launch of Wondershare Filmora, click on the new project to start and click on Import for browsing from the folder. Even you can drag the videos in the media library. After importing all the images, thumbnails are visible on the left corner for the preview on the screen.

Step 2: Flipping the whole video:

When you double-click on the video, the editing panel appears on the screen, and you go to the Video tab to use the transform options. There are different options in the transform menu, including flip, rotate position and scale.

Flipping only a single part of the video:

Wondershare Filmora also allows you to flip a few parts of the video instead of whole. Just move the play head towards the position where you want the split. Click on the icon of Scissors in the menu.

Exporting the flip video:

After the outcome, click on the Export option in the middle on the right side to save the flip video. The pop-up window will appear on the screen, and choose the configuration according to your choice of playing the video. You can even upload the videos on YouTube or burn them to DVD to save them. You can even apply unique effects to your video.

Do you like the basic tutorial about Apple Final Cut Pro? Professional video editing software like FCPX is always popular among creators. However, if video editing is new to you, consider Wondershare Filmora for Mac . This is a powerful but easy-to-use tool for users just starting out. Download the free trial version below.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

After you have finished doing all the editing and transformation, you can then click done so that you get your final product. In case the results are not satisfactory you can click the arrow on the right side of each control to get back to the start and begin afresh.

In case you want to flip videos on Windows or flip clips in an easier way, you can try Wondershare Filmora

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The video below shows how simple it is to flip video in Final Cut Pro.

If you want to rotate and flip video clips on your Mac for free, you can also try iMovie. Check our guide about How to rotate and flip videos in iMovie.

How to Flip a Clip in Final Cut Pro

Step 1: Select a Clip on the Timeline

The timeline is at the bottom portion of the Final Cut Pro. After adding clips to the timeline, you can add tittles and texts as well to these clips before integrating them into your videos.

Step 2: Access the Transform Option

Step 3: Rotate and Re-size Video Clips

You can now do the following steps to rotate the video clip and change the size as well:

There are blue handles at each corner which enable the user to adjust image size while maintaining the aspect ratio of the photo.

Blue handles in the middle of each side are used to adjust horizontal and vertical image sizes changing the aspect ratio of the clips.

The center circle indicates the rotation anchor points that enable the changing of the image position. Drag the blue handle protruding from the circle to rotate the image.

Step 4: Flipping video clips

The positions X and Y enable you to move the image left and right as well as moving it from top to bottom depending on how you want it to be.
The Rotation point allows you to rotate the image around its anchor points.
The Scale option is for resizing the image. Click the small arrow alongside it and then you will see X and Y options. To flip the video clip, just enter-1oo in the X sidebar and press the Enter key. You will see then the selected clip in the timeline will be flipped horizontally to another direction. Enter -100 in the Y sidebar and then the clip will be flipped vertically, namely, upside-down direction.
The Anchor X and Y allows you to Move the image’s center point.

An Easier Way to Flip a Clip in Final Cut Pro Alternative

Features:

Allow removing the background noise
Editing videos and export in multiple formats
Changing the background and adding the special effects to it
Adjusting the white balance in the clips

Flipping the clips more easily in Wondershare Filmora:

Step1: Importing the original video clip:

Step 2: Flipping the whole video:

Flipping only a single part of the video:

Exporting the flip video:

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

In case you want to flip videos on Windows or flip clips in an easier way, you can try Wondershare Filmora

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The video below shows how simple it is to flip video in Final Cut Pro.

If you want to rotate and flip video clips on your Mac for free, you can also try iMovie. Check our guide about How to rotate and flip videos in iMovie.

How to Flip a Clip in Final Cut Pro

Step 1: Select a Clip on the Timeline

The timeline is at the bottom portion of the Final Cut Pro. After adding clips to the timeline, you can add tittles and texts as well to these clips before integrating them into your videos.

Step 2: Access the Transform Option

Step 3: Rotate and Re-size Video Clips

You can now do the following steps to rotate the video clip and change the size as well:

There are blue handles at each corner which enable the user to adjust image size while maintaining the aspect ratio of the photo.

Blue handles in the middle of each side are used to adjust horizontal and vertical image sizes changing the aspect ratio of the clips.

The center circle indicates the rotation anchor points that enable the changing of the image position. Drag the blue handle protruding from the circle to rotate the image.

Step 4: Flipping video clips

The positions X and Y enable you to move the image left and right as well as moving it from top to bottom depending on how you want it to be.
The Rotation point allows you to rotate the image around its anchor points.
The Scale option is for resizing the image. Click the small arrow alongside it and then you will see X and Y options. To flip the video clip, just enter-1oo in the X sidebar and press the Enter key. You will see then the selected clip in the timeline will be flipped horizontally to another direction. Enter -100 in the Y sidebar and then the clip will be flipped vertically, namely, upside-down direction.
The Anchor X and Y allows you to Move the image’s center point.

An Easier Way to Flip a Clip in Final Cut Pro Alternative

Features:

Allow removing the background noise
Editing videos and export in multiple formats
Changing the background and adding the special effects to it
Adjusting the white balance in the clips

Flipping the clips more easily in Wondershare Filmora:

Step1: Importing the original video clip:

Step 2: Flipping the whole video:

Flipping only a single part of the video:

Exporting the flip video:

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

In case you want to flip videos on Windows or flip clips in an easier way, you can try Wondershare Filmora

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The video below shows how simple it is to flip video in Final Cut Pro.

If you want to rotate and flip video clips on your Mac for free, you can also try iMovie. Check our guide about How to rotate and flip videos in iMovie.

How to Flip a Clip in Final Cut Pro

Step 1: Select a Clip on the Timeline

The timeline is at the bottom portion of the Final Cut Pro. After adding clips to the timeline, you can add tittles and texts as well to these clips before integrating them into your videos.

Step 2: Access the Transform Option

Step 3: Rotate and Re-size Video Clips

You can now do the following steps to rotate the video clip and change the size as well:

There are blue handles at each corner which enable the user to adjust image size while maintaining the aspect ratio of the photo.

Blue handles in the middle of each side are used to adjust horizontal and vertical image sizes changing the aspect ratio of the clips.

The center circle indicates the rotation anchor points that enable the changing of the image position. Drag the blue handle protruding from the circle to rotate the image.

Step 4: Flipping video clips

The positions X and Y enable you to move the image left and right as well as moving it from top to bottom depending on how you want it to be.
The Rotation point allows you to rotate the image around its anchor points.
The Scale option is for resizing the image. Click the small arrow alongside it and then you will see X and Y options. To flip the video clip, just enter-1oo in the X sidebar and press the Enter key. You will see then the selected clip in the timeline will be flipped horizontally to another direction. Enter -100 in the Y sidebar and then the clip will be flipped vertically, namely, upside-down direction.
The Anchor X and Y allows you to Move the image’s center point.

An Easier Way to Flip a Clip in Final Cut Pro Alternative

Features:

Allow removing the background noise
Editing videos and export in multiple formats
Changing the background and adding the special effects to it
Adjusting the white balance in the clips

Flipping the clips more easily in Wondershare Filmora:

Step1: Importing the original video clip:

Step 2: Flipping the whole video:

Flipping only a single part of the video:

Exporting the flip video:

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

In case you want to flip videos on Windows or flip clips in an easier way, you can try Wondershare Filmora

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Picture-in-Picture Made Easy: A Final Cut Pro Tutorial

How to Create a Picture-in-Picture Effect Using Final Cut Pro

Benjamin Arango

Mar 27, 2024• Proven solutions

Sometimes we need to show two videos together on the same screen to convey certain usage information. If you are searching for a tool to make this task possible then Final Cut Pro is the best choice for you.

This tool can help you to use the picture-in-picture effect with ease. However, the process for adding this effect cannot be completed within one r two steps.

The article below contains complete details about how to add PIP effects using Final Cut Pro. You will be glad to know that FCP also works with few integrated plugins that assist in the free picture in picture effect generation.

How to Create PIP Effect with FCP

If you are ready with two videos and now want to bring them to the same screen then prefer to follow these simple steps:

Step 1: Add Background video

The very first step that you need to follow for PIP effect generation using FCP is to bring your main or background video to the timeline as a primary storyline. Once you have created the primary storyline then all videos for the PIP effect will be added to it.

Step 2: Add PIP videos

It is time to choose the higher video clip so that the PIP effect can be applied. This task can be done either by using on-screen type controls available on the viewer or you can move ahead with transform controls available on the inspector.

Note that lower clips use to stay in the background in final results whereas upper clips will appear in the foreground. By default, both clips use to have 100% full screen with 100% opaque settings.

Step 3: Apply PIP effect

As now you have added both videos on-screen now you have to select the higher video and then click over the rectangular transform button that is available on the lower-left corner of viewer screen. As soon as you make this selection, the icon will turn into blue color, and naturally 8 dots will appear around the selected image or video. Use any one of these dots for scaling your selection in asymmetrical order.

Step 4: Adjust PIP Effect

If you want to scale this image in a symmetrical fashion then simply drag the dot to the corner from the central position.
Now hold the option key and drag one dot to the corner. It will help you to shrink as well as to enlarge the image even without affecting its actual aspect ratio.
Users can keep on scaling this foreground image till the time they achieve essential size.
Now click inside your selected image and start dragging it to reach a certain specific position. You can place it anywhere on a big screen.

Step 5: Follow precise Adjustment

Simply select the top clip and then hit Command + 4 to open the inspector. Now click on that blue show button over your FCP screen and it will provide you complete information about the transform category of available built-in effects. If you use inspector for this task then it can help you to get very precise results for scaling needs. It assists users to manage images with accurate position and size.

Step 6: Apply Cross- Dissolve

Now choose the leading edge of effect and use Command + T. It will immediately apply the default cross-dissolve option for starting clip.
You will be glad to know that the PIP effect does not restrict users to work just upon a single image rather it can be used to process as many pictures as your project needs and that can fit inside the frame.

Check this video tutorial to know more details:

Picture in Picture Plug-ins for Final Cut Pro

There are so many plug-ins available in the market for Final Cut Pro platform and all of them possess unique qualities along with impressive toolsets. No matter whether you are a beginner with the PIP effect or professional making high-end video projects, FCP plug-ins can make your task much easier with their intuitive controls.

1. Tokyo PiPintor

PiPintor Free is a specially designed picture-in-picture plugin that assists beginners with easy processing of the PIP effect over Final Cut Pro platform. It simply awakes the menu-driven animation power on your tool so that picture in picture effect can be completed without key-framing.

2. ProPIP

Those who need to enjoy a higher level of customizations are advised to work over ProPIP environment. This advanced tool assists users to showcase their abilities with full freedom for personalization.

ProPIP is the best choice for newscasting, commentaries, and many other applications. It helps in generating fine controls for initial as well as end position, rotation, and scaling effects along with easy-to-use media controls over the screen. ProPIP also provides personalized borders with endless opportunities to develop impressive projects on Final Cut Pro platform.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

This tool can help you to use the picture-in-picture effect with ease. However, the process for adding this effect cannot be completed within one r two steps.

How to Create PIP Effect with FCP

If you are ready with two videos and now want to bring them to the same screen then prefer to follow these simple steps:

Step 1: Add Background video

Step 2: Add PIP videos

Note that lower clips use to stay in the background in final results whereas upper clips will appear in the foreground. By default, both clips use to have 100% full screen with 100% opaque settings.

Step 3: Apply PIP effect

Step 4: Adjust PIP Effect

If you want to scale this image in a symmetrical fashion then simply drag the dot to the corner from the central position.
Now hold the option key and drag one dot to the corner. It will help you to shrink as well as to enlarge the image even without affecting its actual aspect ratio.
Users can keep on scaling this foreground image till the time they achieve essential size.
Now click inside your selected image and start dragging it to reach a certain specific position. You can place it anywhere on a big screen.

Step 5: Follow precise Adjustment

Step 6: Apply Cross- Dissolve

Now choose the leading edge of effect and use Command + T. It will immediately apply the default cross-dissolve option for starting clip.
You will be glad to know that the PIP effect does not restrict users to work just upon a single image rather it can be used to process as many pictures as your project needs and that can fit inside the frame.

Check this video tutorial to know more details:

Picture in Picture Plug-ins for Final Cut Pro

1. Tokyo PiPintor

2. ProPIP

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

This tool can help you to use the picture-in-picture effect with ease. However, the process for adding this effect cannot be completed within one r two steps.

How to Create PIP Effect with FCP

If you are ready with two videos and now want to bring them to the same screen then prefer to follow these simple steps:

Step 1: Add Background video

Step 2: Add PIP videos

Note that lower clips use to stay in the background in final results whereas upper clips will appear in the foreground. By default, both clips use to have 100% full screen with 100% opaque settings.

Step 3: Apply PIP effect

Step 4: Adjust PIP Effect

If you want to scale this image in a symmetrical fashion then simply drag the dot to the corner from the central position.
Now hold the option key and drag one dot to the corner. It will help you to shrink as well as to enlarge the image even without affecting its actual aspect ratio.
Users can keep on scaling this foreground image till the time they achieve essential size.
Now click inside your selected image and start dragging it to reach a certain specific position. You can place it anywhere on a big screen.

Step 5: Follow precise Adjustment

Step 6: Apply Cross- Dissolve

Now choose the leading edge of effect and use Command + T. It will immediately apply the default cross-dissolve option for starting clip.
You will be glad to know that the PIP effect does not restrict users to work just upon a single image rather it can be used to process as many pictures as your project needs and that can fit inside the frame.

Check this video tutorial to know more details:

Picture in Picture Plug-ins for Final Cut Pro

1. Tokyo PiPintor

2. ProPIP

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

This tool can help you to use the picture-in-picture effect with ease. However, the process for adding this effect cannot be completed within one r two steps.

How to Create PIP Effect with FCP

If you are ready with two videos and now want to bring them to the same screen then prefer to follow these simple steps:

Step 1: Add Background video

Step 2: Add PIP videos

Note that lower clips use to stay in the background in final results whereas upper clips will appear in the foreground. By default, both clips use to have 100% full screen with 100% opaque settings.

Step 3: Apply PIP effect

Step 4: Adjust PIP Effect

If you want to scale this image in a symmetrical fashion then simply drag the dot to the corner from the central position.
Now hold the option key and drag one dot to the corner. It will help you to shrink as well as to enlarge the image even without affecting its actual aspect ratio.
Users can keep on scaling this foreground image till the time they achieve essential size.
Now click inside your selected image and start dragging it to reach a certain specific position. You can place it anywhere on a big screen.

Step 5: Follow precise Adjustment

Step 6: Apply Cross- Dissolve

Now choose the leading edge of effect and use Command + T. It will immediately apply the default cross-dissolve option for starting clip.
You will be glad to know that the PIP effect does not restrict users to work just upon a single image rather it can be used to process as many pictures as your project needs and that can fit inside the frame.

Check this video tutorial to know more details:

Picture in Picture Plug-ins for Final Cut Pro

1. Tokyo PiPintor

2. ProPIP

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Unbiased Reviews: Finding the Perfect YouTube to MP3 Converter

How to Find a Suitable YouTube to MP3 Converter

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

YouTube to Mp3 Converter is a program or platform that will let you transform YouTube videos to audio format, i.e., MP3, mainly observed when we wish to convert the video into the audio format, as the audio is critically more important than the video.

Now we’re here to explore further the format by converting YouTube MP4 videos to MP3.

Part 1 How to Convert YouTube Videos to MP3?

320YTmp3 is an easy-to-use YouTube converter that extracts YouTube audio files at a good quality.

Steps to convert YouTube to MP3 using 320YTmp3.

Step 1: Visit the 320YTmp3 official website. Copy the Youtube URL for a particular song or a video you want to convert to mp3 and download it in the box. Then, hit the “Search“button.

Step 2: You’ll now wander the MP3 download options. Select the dropdown menu to choose the download speed.

You can get higher download speeds if you possess a good Wi-Fi connection. Else, stick to the 64 kbps speed. Click “Convert” once you’ve chosen the download speed.

Step 3: It may take a while to convert the video to MP3, based on its size. Once the video converts, click on the “Download“ button to download and save your video.

Step 4: If you wish to save your video in other audio formats like m4a or webm, hit the “Audio“tab and hit the “Download“button next to your preferred format.

Consider using this YouTube mp3 converter and download your favorite music to listen to offline!

Part 2 What Should Consider Before Choosing Suitable YouTube to MP3 Converter?

01Look for the best SaaS App

First off, you wish to go for a SaaS app that works well on your desktop screen.

You want to use an app that does YouTube to MP3 format for PC. It should work on Mac and Windows OS.

01Feature of Batch Conversion

You may also desire the potential to convert YouTube playlists to MP3. Again, the batch transform will save time in pasting and copying links.

And you may be looking for mobile compatibility as well. In such a scenario, you can look for a vendor with a YouTube to MP3 app. And, if the brand of your smartphone is Android, then you may be looking to go for that.

01Format Compatibility

Besides converting YouTube to MP3, various other audio formats could be desirable.

Then, there’s a quality output level worth considering in a YouTube to MP3 converter. You may be enough or satisfied with lower bitrates like 96kbps in the interest of saving storage space.

Last but not least, you are looking for a platform that’s trustworthy and reliable. You don’t want your mobile or computer device’s security compromised.

There are tons of YouTube to MP3 converter tools out there, and most of them are adware supported. Some of them even contain malware.

So you want to make sure you do your research before you download anything.

Meanwhile, web browser-based conversion tools tend to be a bit more secure. And, the security of programs, namely the Wondershare Filmora, is hidden from nobody. Everyone using the software appreciates its authenticity besides its creative outlook.

So, let’s explore more about the Wondershare Filmora to convert YouTube to MP3 and extract audio seamlessly.

This method provides you access to convert YouTube to MP3 using a Video Editor. Wondershare Filmora offers various professional and essential editing tools and video effects and can download YouTube MP3 format. Filmora will be perfect for you if you need further editing after YouTube to MP3 conversion.

It is a beautiful product from Wondershare to edit after you convert YouTube to MP3.

Excited to explore unique features, then scroll down as follows:

● Flexible audio control for better audio adjustment

● Trim and Cut your desired tracks in video and audio files

● Get rid of unwanted noise and background disturbances in the audio files

● This tool guarantees crisp and quality video and audio files

Steps to convert YouTube to MP3 via Wondershare Filmora Video Editor :

Step 1: Launch Filmora to Upload Video

Open Filmora, then go to File-Import-Media to load the converted MP4 video to the Media Library.

Step 2: Drag Video to Edit

Drag the video or media to the timeline by clicking on the track.

Step 3: Convert to MP3

Then select the ‘Export’ tab and choose the ‘MP3’ format from the vast list.

Hit the Settings tab in the export panel to customize the output audio settings, such as the audio bitrate for higher audio quality.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

Key Takeaways from This Episode

● An overview on YouTube to MP3 conversion.

● Essential factors to consider before choosing the YouTube to MP3 Converter.

● Finding the perfect as well as safe YouTube to MP3 Converter.